1
06/08/2012 Proof testing of lifting beams used to lift wind turbine components.
2
03/01/2010 Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
3
03/01/2010 Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
4
01/25/2006 OSHA requirements applicable to use of the Contex "Magic Arm" below-the-hook lifting device.
5
03/04/2004 Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design.
6
02/09/2004 Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
7
07/07/2003 Marking and proof-testing requirements for special custom-designed lifting accessories.
8
07/07/2003
Marking and proof-testing requirements for special custom-designed lifting accessories.
9
02/25/2003 Retesting of reassembled lifting accessories if original manufacturing controls are ensured; retesting requirement if repair/replacement of parts due to breakage, damage, or evidence of diminished capacity.
10
08/15/2002 Rigging equipment for material handling; custom-designed accessories.
11
06/14/2002 Custom-designed lifting accessories must be proof-tested and marked before being deployed for use and after repair or replacement.
12
08/04/2000 Alloy steel chain slings must not be loaded beyond working load limit.
