Company and Location,Date of Occurrence,Preliminary Description of Incident
,Fatality,
"Doran's Inc., North Haven, CT  06473",24-May-10,Worker was stabbed by patron with a knife.
"GBC Metals LLC., dba Olin Brass Somers Thin Strip, Watrebury, CT  06720",24-May-10,Worker was performing a heat change on a furnace and was running the product.  Worker was later found caught up in the rolls of the bridle.
"ESCO, Windsor, CT  06095",27-May-10,"Worker was working on an electrical system.  Unknown whether the worker sustained injuries from an electrical shock, natural causes, or a fall from a ladder."
"Roth Metal Works, Brooklyn, NY  11205",27-May-10,Worker doing steel erection fell 60 feet from a structural steel beam.
"Chalfont Custom Painting, Chalfont, PA  18914",28-May-10,Worker was trimming branches from a tree using a metal painter's pole near a 2400 Volt electrical wire.  Worker was later found on the ground at the bottom of the ladder.  Worker was electrocuted.
"AAA Asphalt Paving, Inc., Pasadena, TX  77502",28-May-10,Worker was probing a ditch for gas lines and was struck by a vehicle.
"Paul Construction Company LLC, Mountain Home, AR  72653",28-May-10,Worker was installing new cell phone cables and antennas.  He was descending the tower and fell 240 feet.
"Design Metals, Columbia, MO  65203",25-May-10,"Working was removing roof panels, became tangled with either an electrical cord or rope.  He disconnected his fall protection to untangle it, stepped back and fell through a section of the roof that had been removed, falling 23 to 25 feet to the concrete below."
"Done-Rite Tree Company, Inc., Caldwell, ID  83605",24-May-10,"Worker was using a chainsaw to cut through a tree stump when the chainsaw got stuck in the stump.  A skid steer with a grapple attachment was used to push against the stump to free the chainsaw. The worker motioned for more pressure on the stump, and then he bent down and forward to look at the chainsaw.  The grapple cycle shot, striking the worker in the temple area."
,,