Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Your search for welding safety has returned 1202 results.
Results 16 - 30

Search Results Found in:
Regulations 51
Interpretations 80
Federal Register 241
eTools 63
Directives 35
Publications 70
Construction 35
Small Business 1
Alliances 74
Compliance Assist 4
Regs/Guidance 8
Safety/Hlth Topics 47
Tech Information 42
General Industry 3
Sampling/Analysis 4
Enforcement 71
OSH Bulletins 2
Federal Agencies 1
Maritime 122
Events 2
Partnership 5
QuickTakes 27
Success Stories 4
FAQ 1
Other 209
Full Site Search
 
Result Page: 1 2 3 4 5 6 7 8 9 10 ...
 
Shipyard Employment eTool > Shipbuilding
http://www.osha.gov/SLTC/etools/shipyard/shipbuilding/index.html
 
1910.253(a)General requirements. - 1910.253(a)(1)Flammable mixture. Mixtures of fuel gases and air or oxygen may be explosive and shall be guarded against. No device or attachment facilitating or per
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9854
 
1910.254(a)General - 1910.254(a)(1)Equipment selection. Welding equipment shall be chosen for safe application to the work to be done as specified in paragraph (b) of this section. 1910.254(a)(2)Inst
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9855
 
1910.255(a)General - 1910.255(a)(1)Installation. All equipment shall be installed by a qualified electrician in conformance with Subpart S of this part. There shall be a safety-type disconnecting swi
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9856
 
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=12929
 
1915.51(a)The provisions of this section shall apply to all ship repairing, shipbuilding, and shipbreaking operations; except that paragraph (e) of this section shall apply only to ship repairing and
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10229
 
1915.53(a)The provisions in this section shall apply to all ship repairing, shipbuilding and shipbreaking operations except for paragraphs (e) and (f) of this section which shall apply to ship repair
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10231
 
The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. 1915.54(a)Drums, containers, or hollow structures which have contained flammable substances shall, before w
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10232
 
The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. 1915.55(a)Transporting, moving and storing compressed gas cylinders. 1915.55(a)(1)Valve protection caps sha
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10233
 
The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. 1915.56(a)Manual electrode holders. 1915.56(a)(1)Only manual electrode holders which are specifically desig
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10234
 
1917.152(a)Definition. "Hot work" means riveting, welding, flame cutting or other fire or spark-producing operation. 1917.152(b)Hot work in confined spaces. Hot work shall not be performed in a confi
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10416
 
Chains or other gear which have been lengthened, altered or repaired by welding shall be properly heat treated where necessary, and, before again being put into use, shall be tested and reexamined in
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10519
 
1926.350(a)Transporting, moving, and storing compressed gas cylinders. 1926.350(a)(1)Valve protection caps shall be in place and secured. 1926.350(a)(2)When cylinders are hoisted, they shall be secur
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10696
 
1926.351(a)Manual electrode holders. 1926.351(a)(1)Only manual electrode holders which are specifically designed for arc welding and cutting, and are of a capacity capable of safely handling the maxi
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10697
 
1926.353(a)Mechanical ventilation. For purposes of this section, mechanical ventilation shall meet the following requirements: 1926.353(a)(1)Mechanical ventilation shall consist of either general mec
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10699
Result Page: 1 2 3 4 5 6 7 8 9 10 ...

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close