Search Results Found in:
|
1926.964(a) General. 1926.964(a)(1) Application. This section provides additional requirements for work performed on or near overhead lines and equipment and for live-line barehand work. 1926.964(a)( http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=853 1910.268(a) Application. 1910.268(a)(1) This section sets forth safety and health standards that apply to the work conditions, practices, means, methods, operations, installations and processes perfo http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9867 1910.269(a) General 1910.269(a)(1) Application. 1910.269(a)(1)(i) This section covers the operation and maintenance of electric power generation, control, transformation, transmission, and distributi http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9868 1910.67(a) Definitions applicable to this section— 1910.67(a)(1) Aerial device. Any vehicle—mounted device, telescoping or articulating, or both, which is used to position personnel. 1910 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9732 Appendix B to Subpart CC of Part 1926--Assembly/Disassembly: Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement 1. Section 1926.1404(f)(1) provides that when pins (or sim http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=133 1926.453(a)"General requirements." 1926.453(a)(1)Unless otherwise provided in this section, aerial lifts acquired for use on or after January 22, 1973 shall be designed and constructed in conformance http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10754 1926.954(a) General. Personal protective equipment shall meet the requirements of Subpart E of this part. Note to paragraph (a): Paragraph (d) of § 1926.95 sets employer payment obligations for http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10825 1926.959(a) General requirements. 1926.959(a)(1) Other applicable requirements. Mechanical equipment shall be operated in accordance with applicable requirements in this part, including Subparts N, O http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10830 1910.333(a)"General." Safety-related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9910 ANSI/SIA A92.2-1990 Vehicle-Mounted Elevating and Rotating Aerial Devices ANSI/SIA A92.3-1990 Manually Propelled Elevating Aerial Platforms ANSI/SIA A92.5-1990 Boom Supported Elevating Work Platforms http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10919 The requirements of this section are supplemental to the other requirements in this subpart and apply when one or more employees are hoisted. 1926.1431(a)The use of equipment to hoist employees is pr http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=97 |