Directives
#
 1  2011 - 11/29/2011 - CPL 03-00-014 - PSM Covered Chemical Facilities National Emphasis Program
 2  2009 - 08/18/2009 - CPL 03-00-010 - Petroleum Refinery Process Safety Management National Emphasis Program
 3  2008 - 02/11/2008 - CPL 02-00-147 - The Control of Hazardous Energy Enforcement Policy and Inspection Procedures

Federal Registers
#
 1  2014 - 04/02/2014 - Standard on the Control of Hazardous Energy (Lockout/Tagout); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements - 79: 18583-18585
 2  2011 - 07/25/2011 - General Working Conditions in Shipyard Employment; Correction - 76: 44265
 3  2008 - 09/18/2008 - Tree Care Operations - 73:54118-54123
 4  2008 - 02/25/2008 - Submission for OMB Review: Comment Request - 73:10067
 5  2007 - 10/30/2007 - Standard on the Control of Hazardous Energy (Lockout/Tagout); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements - 72:61378-61381
 6  2004 - 03/11/2004 - Control of Hazardous Energy (Lockout/Tagout) Standard; Extension of the Office of Management and Budget's Approval of Information-Collection (Paperwork) Requirements - 69:11664-11666
 7  2002 - 09/06/2002 - Submission for OMB Review; Comment Request - 67:57036-57037
 8  2002 - 06/06/2002 - Submission for OMB Review; Comment Request - 67:39049
 9  2002 - 03/07/2002 - Submission for OMB Review; Comment Request - 67:10435
 10  2001 - 12/28/2001 - Standard on the Control of Hazardous Energy sources (Lockout/Tagout)(29 CFR 1910.147); Extension of the Office of Management and Budget's (OMB) Approval of Information-Collection (Paperwork) Requirements. - 66:67321-67323
 11  2000 - 06/20/2000 - The Control of Hazardous Energy (Lockout/Tagout): Notice of the Availability of a Lookback Review Pursuant to the Regulatory Flexibility Act and Executive Order 12866. - 65:38302-38304
 12  1999 - 01/04/1999 - Oregon State Standards; Notice of Approval. - 63:71656
 13  1999 - 01/04/1999 - Permit-Required Confined Spaces. - 64:204
 14  1998 - 12/04/1998 - Submission for OMB Review; Comment Request. - 63:67136-67139
 15  1998 - 12/01/1998 - Permit-Required Confined Spaces. - 63:66018-66036
 16  1998 - 08/13/1998 - Control of Hazardous Energy Sources (Lockout/Tagout) (29 CFR 1910.147); Information Collection Requirements. - 63:43424-43425
 17  1997 - 07/31/1997 - Review of the Ethylene Oxide Standard. - 62:41002
 18  1997 - 07/31/1997 - Review of the Control of Hazardous Energy Sources (Lockout/Tagout) Standard. - 62:41002
 19  1997 - 05/29/1997 - Notice of Public Meeting on Review of the Control of Hazardous Energy Sources (Lockout/Tagout) Standard (29 CFR 1910.147) - 62:29089-29090
 20  1993 - 03/30/1993 - Control of Hazardous Energy Sources (Lockout/Tagout); Supplemental Statement of Reasons. - 58:16612-16623
 21  1990 - 09/20/1990 - Corrections and Technical Amendments to Final Rule on Control of Hazardous Energy Sources (Lockout/Tagout) - 55:38677-88
 22  1989 - 11/06/1989 - Control of Hazardous Energy; Lockout/Tagout; Suspension of Effective Date - 54:46610
 23  1989 - 10/17/1989 - Control of Hazardous Energy Sources (Lockout/Tagout) - 54:42498-42499
 24  1989 - 10/06/1989 - Control of Hazardous Energy Sources (Lockout/Tagout); Electrical Safety - 54:41364
 25  1989 - 09/01/1989 - Control of Hazardous Energy (Lockout/Tagout); Machinery, Equipment Maintenance; Final Rule - 54:36644-36690
 26  1988 - 08/30/1988 - Lockout/Tagout - 53:33149-50
 27  1988 - 08/09/1988 - Lockout/Tagout - 53:29920-2
 28  1988 - 04/29/1988 - Lockout/Tagout - 53:15496-15528

Standard Interpretations
#
 1  2012 - 12/12/2012 - Whether an LED type device ca be used for the isolation and deenergization verification requirements of 1910.147 and 1910.333.
 2  2012 - 08/02/2012 - Clarification on the use of a tagout device when an energy isolating device is capable of being locked out.
 3  2012 - 04/03/2012 - Application of Lockout/Tagout to Employees Performing Maintenance Tasks on Cord and Plug Equipment
 4  2011 - 08/30/2011 - Use of local valves as a means of equipment isolation for energy control.
 5  2011 - 08/04/2011 - Numerous questions on lockout/tagout under 1910.147 and 1910.269
 6  2010 - 11/30/2010 - Numerous questions on lockout/tagout under 1910.147 and Subpart S.
 7  2008 - 01/25/2008 - Use of a PLC system as an alternative measure which provides effective protection for minor servicing activities.
 8  2007 - 05/04/2007 - Lockout/Tagout and the provisions for testing or positioning of machines while they are energized.
 9  2007 - 04/23/2007 - Application of Control of Hazardous Energy (LOTO) requirements to compressed gas cylinders.
 10  2007 - 04/18/2007 - PRCS and LOTO requirements for accumulation of stored energy in steam pits
 11  2007 - 02/26/2007 - Evaluation of the ElectroGuard disconnect system for use as an energy isolating device.
 12  2006 - 12/28/2006 - Application of the Lockout/Tagout standard to die-setting activities and other machine setup operations.
 13  2006 - 10/11/2006 - Use of LOTO device on equipment placed in "out of service" status not related to servicing or maintenance.
 14  2006 - 08/25/2006 - Several questions regarding OSHA's LOTO and Bakery standards 29 CFR 1910.147 and 1910.263.
 15  2006 - 07/28/2006 - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
 16  2006 - 07/12/2006 - PSM compliance for ammonia refrigeration systems.
 17  2006 - 05/09/2006 - Use of additional lock on a conveyor and baler system exceeds one lockout device.
 18  2006 - 01/18/2006 - Interlock requirements for access door(s) of trash compactor.
 19  2005 - 10/24/2005 - Training programs for the Control of Hazardous Energy (LOTO) and for the Hazard Communication standard are not satisfied solely by merely providing employees written documentation.
 20  2005 - 08/24/2005 - Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
 21  2005 - 07/07/2005 - Machine guarding and exposure to hazards from robotic laundry shuttles.
 22  2005 - 04/22/2005 - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
 23  2004 - 04/07/2004 - Printing Industry: Lock Out/Tag Out and the essential elements of the inch-safe-service technique.
 24  2003 - 06/13/2003 - Response to Edison Electric Institute's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
 25  2003 - 06/13/2003 - Response to Exelon Generation's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
 26  2003 - 05/13/2003 - Acceptability of modifying a standard on/off switch to provide lockout capability to a machine.
 27  2002 - 12/02/2002 - Applicability of the confined-space standard to dock-leveler pits.
 28  2002 - 08/30/2002 - Color is not the only prescribed factor for the standardization of LOTO devices.
 29  2002 - 07/08/2002 - Use of verification tags for lockout.
 30  2000 - 11/16/2000 - Applicability of OSHA's LOTO standards; isolation and verification procedures.
 31  2000 - 07/10/2000 - Evaluation of proposed modifications to the Bureau of Prisons' Lockout/Tagout (LOTO) procedures.
 32  1999 - 11/10/1999 - LOTO of hydraulic systems; postal workers' exposure to hazardous material spills.
 33  1999 - 02/26/1999 - OSHA enforcement policy on vertical food mixers.
 34  1998 - 08/19/1998 - Workers must be protected from hazards of heated (hot) surfaces.
 35  1997 - 02/27/1997 - Clarification on entitlement of a copy of energy control program documentation at meat packing plant.
 36  1996 - 10/29/1996 - Consultants performing lockout/tagout periodic inspections.
 37  1996 - 10/02/1996 - Food Inspectors lockout/tagout procedures.
 38  1996 - 09/11/1996 - Voluntary safety and health audits under the Occupational Safety and Health Act.
 39  1996 - 05/15/1996 - Electrical generators in hospitals and the control of hazardous energy.
 40  1995 - 10/27/1995 - Guidance in determining whether elevator pits meet the definition of confined spaces.
 41  1995 - 09/27/1995 - Interpretation of the Process Safety Management of Highly Hazardous Chemicals Standard.
 42  1995 - 08/28/1995 - The Lockout/Tagout Standard.
 43  1995 - 05/24/1995 - Clarification concerning the Electric Power Generation, Transmission, and Distribution standard.
 44  1994 - 02/09/1994 - OSHA's lockout/tagout standard is not applicable to maritime employment.
 45  1993 - 11/15/1993 - Permit-Required Confined Spaces: metal container curing ovens.
 46  1993 - 06/14/1993 - Applicability of the Machine Guarding and Lockout/Tagout standards to printing presses.
 47  1992 - 09/16/1992 - Printing Presses: requirements for normal production and servicing operations.
 48  1991 - 08/05/1991 - Motor starter circuits and energy isolation devices
 49  1991 - 06/04/1991 - Interpretation of 1910.147, related to floating fish processors.
 50  1991 - 04/10/1991 - Work permits in lockout/tagout standard requirements
 51  1990 - 05/23/1990 - Guarding of machinery in bowling centers.

Regulations (Standards - 29 CFR)
#
 1  1910.147 - The control of hazardous energy (lockout/tagout).