Powered by GoogleTranslate
Standard Interpretations - Table of Contents
• Standard Number: 1910.107

August 3, 1995

Mr. John E. Sloop
President
Advanced Air Technologies, Inc.
P.O. Box 5669
Statesville, North Carolina 28687

Dear Mr. Sloop:

This is in response to your July 5 letter requesting a compliance determination of your control device system used primarily in paint spray booth applications.

With regard to whether a booth which meets or exceeds all NFPA No. 33-1989 requirements comply with OSHA standards, please be advised that in addition to 29 CFR 1910.107 which covers spray booths, OSHA adopted the Standard for Spray Finishing Using Flammable and Combustible Materials, NFPA No. 33-1969, but has not yet adopted NFPA No. 33-1989.

Therefore, compliance with NFPA No. 33-1989 would be considered a de minimis violation. De minimis violations are violations of standards which have no direct or immediate relationship to safety and health and shall not be included in citations.

If we can be of any further assistance, please contact Ms. Renee Carter of my staff at (202) 219-8041, x117.

Sincerely,



Raymond E. Donnelly
Director
Office of General Industry Compliance Assistance


Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close