Powered by GoogleTranslate
Unified Agenda - Table of Contents

Priority: Substantive, Nonsignificant. Major status under 5 USC 801 is undetermined.

Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 29 USC 657

CFR Citation: 29 CFR Part 1910.217

Legal Deadline: None

Abstract: The Occupational Safety and Health Administration's (OSHA) mechanical power press standard (29 CFR 1910.217), protects employees from injuries that result from working with or around mechanical power presses through the use of machine guards (prevents hands in danger zone) and through limitations on initiation of a press cycle (either two-hand or foot operated). A presence-sensing device (PSD), typically a light curtain, initiates a press cycle only when the system indicates that no objects, such as a hand, are within the hazard zone. OSHA adopted the use of presencesensing device initiation (PSDI) on mechanical power presses believing that the provision would substantially protect workers and improve productivity. However, OSHA requires PSDI systems to be validated by an OSHA-certified third party, and no organization has agreed to validate PSDI installations. OSHA performed a look back review of PSDI and determined that the current ANSI standard permits PSDI without independent validation but includes other provisions to maintain PSDI safety.

Based on its completion of the lookback review of PSDI (69 FR 31927), OSHA is planning to revise and update the standard on power presses, which currently covers only mechanical power presses. OSHA will base the revision of the 2001 or later edition of the American National Standards Institute (ANSI) standard on Mechanical Power Presses, ANSI B11.1. Further, OSHA is considering expanding the standard to cover other presses such as hydraulic and pneumatic power presses and to include the latest guarding techniques. This revision will provide the first major update of the Mechanical Power Presses Standard since it was originally published in 1971.


Action Date FR Cite

ANPRM 12/00/06  

Regulatory Flexibility Analysis Required: Undetermined

Small Entities Affected: Businesses

Government Levels Affected: Undetermined

Federalism: Undetermined

Agency Contact: Dorothy Dougherty, Acting Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room 3718, Washington, DC 20210
Phone: 202 693-1950
Fax: 202 693-1678
Email: dougherty.dorothy@dol.gov

RIN: 1218-AC22

Unified Agenda - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.