US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Unified Agenda - Table of Contents
1624. • CONTROLLED NEGATIVE PRESSURE FIT TESTING PROTOCOL: AMENDMENT TO THE FINAL RULE ON RESPIRATORY PROTECTION

Priority: Info./Admin./Other

Legal Authority: 29 USC 655(b); 29 USC 657

CFR Citation: 29 CFR 1910.134

Legal Deadline: None

Abstract: In January 1998, OSHA published the final Respiratory Protection standard (29 CFR 1910.134). In the final revised respirator standard, OSHA set up a mechanism for OSHA's acceptance of new fit test protocols under Mandatory Appendix A. Any person may submit to OSHA an application for approval of a new fit test protocol, and if the application meets certain criteria, OSHA will initiate a rulemaking proceeding under 6(b)(7) of the OSH Act to determine whether to list the new protocol as an approved fit test protocol in Appendix A. OSHA has been petitioned to allow the use of a modified Controlled Negative Pressure (CNP) fit test protocol.

Employers, employees, and safety and health professionals use fit testing to select respirators. Currently OSHA relies on fit testing methods specified in Appendix A of the final revised Respiratory Protection standard.

When OSHA published the final Respiratory Protection standard in 1998, it allowed for later rulemaking on new fit test methods. This rulemaking action will allow for the incorporation of new fit test methods into 1910.134.

Timetable:

Action Date FR Cite

Next Action To Be Determined 02/00/03  
Regulatory Flexibility Analysis Required: No

Government Levels Affected: State, Local, Tribal, Federal

Agency Contact: Steven F. Witt, Director, Directorate of Health Standards Programs, Department of Labor, Occupational Safety and Health Administration, Room N3718, 200 Constitution Avenue NW, FP Building, Washington, DC 20210
Phone: 202 693-1950

RIN: 1218-AC05


Department of Labor (DOL) Proposed Rule Stage
Occupational Safety and Health Administration (OSHA)

Unified Agenda - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close