Unified Agenda - Table of Contents|
Legal Authority: 29 USC 655(b); 29 USC 657
CFR Citation: 29 CFR 1910.134
Legal Deadline: None
Abstract: In January 1998, OSHA published the final Respiratory Protection standard (29 CFR 1910.134). In the final revised respirator standard, OSHA set up a mechanism for OSHA's acceptance of new fit test protocols under Mandatory Appendix A. Any person may submit to OSHA an application for approval of a new fit test protocol, and if the application meets certain criteria, OSHA will initiate a rulemaking proceeding under 6(b)(7) of the OSH Act to determine whether to list the new protocol as an approved fit test protocol in Appendix A. OSHA has been petitioned to allow the use of a modified Controlled Negative Pressure (CNP) fit test protocol.
Employers, employees, and safety and health professionals use fit testing to select respirators. Currently OSHA relies on fit testing methods specified in Appendix A of the final revised Respiratory Protection standard.
When OSHA published the final Respiratory Protection standard in 1998, it allowed for later rulemaking on new fit test methods. This rulemaking action will allow for the incorporation of new fit test methods into 1910.134.
Regulatory Flexibility Analysis Required: No
Government Levels Affected: State, Local, Tribal, Federal
Agency Contact: Steven F. Witt, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, Room N3605, 200 Constitution Avenue NW., Washington, DC 20210
Phone: 202 693-2222
Fax: 202 693-1663
|Unified Agenda - Table of Contents|