Unified Agenda - Table of Contents|
2280. CONTROL OF HAZARDOUS ENERGY (LOCKOUT) IN CONSTRUCTION (PART 1926) (PREVENTING CONSTRUCTION INJURIES/FATALITIES: LOCKOUT)
Priority: Economically Significant
Legal Authority: 29 USC 655(b); 40 USC 333
CFR Citation: 29 CFR 1926
Legal Deadline: None
Abstract: OSHA issued a general industry rule on September 1, 1989 (54 FR 36644) to address the hazards posed to workers by the failure to control hazardous energy (i.e., the failure to properly lock out or tag out machines and equipment) during repair and servicing activities. OSHA has not yet issued a standard to prevent these accidents during equipment repair and maintenance activities in the construction industry. Four million workers annually may be exposed to this hazard in construction workplaces.
Construction sites often do not have effective lockout/tagout procedures to control hazardous energy because of several factors, all associated with the nature of the construction industry. These factors basically relate to the types of machines and equipment found in construction; the makeup of the industry (i.e., employment is relatively "short term," lasting only as long as the length of the current project); multiple employers having different employer/employee relationships are present at the same site; and "in-the-field" maintenance activity is usually temporary. OSHA intends to issue a proposal to address this hazard in this industry.
|NPRM||To Be Determined|
Regulatory Flexibility Analysis Required: Undetermined
Government Levels Affected: None
Agency Contact: Russell B. Swanson, Director, Directorate of Construction, Department of Labor, Occupational Safety and Health Administration, Room N3468, 200 Constitution Avenue NW, FP Building, Washington, DC 20210
Phone: 202 693-2020
Fax: 202 693-1689
|Unified Agenda - Table of Contents|