Unified Agenda - Table of Contents|
2151. STEEL ERECTION (PART 1926) (SAFETY PROTECTION FOR IRONWORKERS)
Regulatory Plan: This entry is Seq. No. 84 in Part II of this issue of the Federal Register.
84. STEEL ERECTION (PART 1926) (SAFETY PROTECTION FOR IRONWORKERS)
Economically Significant. Major under 5 USC 801.
This rulemaking is part of the Reinventing Government effort. It will revise text in the CFR to reduce burden or duplication, or streamline requirements.
29 USC 655; 40 USC 333
29 CFR 1926.750 (Revision); 29 CFR 1926.751 (Revision); 29 CFR 1926.752 (Revision)
In 1992, OSHA announced that it would develop a proposal for revising steel erection safety requirements using the negotiated rulemaking process. In negotiated rulemaking, OSHA, industry and employee representatives meet as an advisory committee and attempt to forge a consensus on a proposed standard. An advisory committee for this rule was formed in 1994. Its work resulted in the publication of a proposed rule on August 13, 1998.
The written comment period ended November 17, 1998. A public hearing was held in Washington, D.C. on December 1-11, 1998. The post-hearing comment period closed April 12, 1999. OSHA is now working to complete a final rule.
Statement of Need:
In 1989, the Ironworkers International Union and National Erectors Association petitioned OSHA to revise the steel erection standard through negotiated rulemaking. In light of the significant number of steel erection fatalities and injuries and concerns that the Agency's existing rule fails to adequately address a number of factors affecting safety, OSHA determined that the current rule needed to be revised.
Summary of Legal Basis:
The legal basis for the proposed steel erection rule is a preliminary finding that workers engaged in steel erection work are at significant risk of serious injury or death as a result of that work.
OSHA considered continuing to rely on the existing rule. The Agency also considered issuing a proposed rule without negotiated rulemaking. Leaving the existing rule unchanged was rejected because of the apparent inadequacies of the standard. Negotiated rulemaking was chosen to help resolve conflicts and produce a proposal sooner.
Anticipated Cost and Benefits:
OSHA expects compliance with the proposal to impose annualized costs of about $50 million per year. Benefits are expected to include the prevention of about 14 fatalities and 824 lost workday injuries per year.
OSHA estimates that at least 28 workers die each year while engaged in steel erection. Falls continue to be the leading cause of job-related deaths among construction workers, and steel erection involves a significant degree of exposure to fall hazards.
|Notice of Committee Establishment||05/11/94||59 FR 24389|
|NPRM||08/13/98||63 FR 43451|
|NPRM Comment Period End||11/17/98|
Regulatory Flexibility Analysis Required:
Small Entities Affected:
Government Levels Affected:
Russell B. Swanson
Director, Directorate of Construction
Department of Labor
Occupational Safety and Health Administration
200 Constitution Avenue NW
Washington, DC 20210
Phone: 202 693-2020
Fax: 202 693-1689
|Unified Agenda - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.