US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Regulations (Standards - 29 CFR) - Table of Contents
• Part Number: 1910
• Part Title: Occupational Safety and Health Standards
• Subpart: Q
• Subpart Title: Welding, Cutting, and Brazing
• Standard Number: 1910.251
• Title: Definitions.
• GPO Source: e-CFR


As used in this subpart:
1910.251(a)
Welder and welding operator mean any operator of electric or gas welding and cutting equipment.
1910.251(b)
Approved means listed or approved by a nationally recognized testing laboratory. Refer to 1910.155(c)(3) for definitions of listed and approved, and 1910.7 for nationally recognized testing laboratory.
1910.251(c)
[Removed]

[39 FR 23502, Jun 27, 1974, as amended at 53 FR 12122, April 12, 1988; 55 FR 13696, April 11, 1990; 61 FR 9227, March 7, 1996; 72 FR 71070, Dec. 14, 2007]

Next Standard (1910.252)

Regulations (Standards - 29 CFR) - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close