Powered by GoogleTranslate
Regulations (Standards - 29 CFR) - Table of Contents
• Part Number: 1910
• Part Title: Occupational Safety and Health Standards
• Subpart: D
• Subpart Title: Walking-Working Surfaces
• Standard Number: 1910.30
• Title: Other working surfaces.
• GPO Source: e-CFR

"Dockboards (bridge plates)."
Portable and powered dockboards shall be strong enough to carry the load imposed on them.
Portable dockboards shall be secured in position, either by being anchored or equipped with devices which will prevent their slipping.
Powered dockboards shall be designed and constructed in accordance with Commercial Standard CS202-56 (1961) "Industrial Lifts and Hinged Loading Ramps" published by the U.S. Department of Commerce, which is incorporated by reference as specified in Sec. 1910.6.
Handholds, or other effective means, shall be provided on portable dockboards to permit safe handling.
Positive protection shall be provided to prevent railroad cars from being moved while dockboards or bridge plates are in position.
"Forging machine area."
Machines shall be so located as to give,
enough clearance between machines so that the movement of one operator will not interfere with the work of another,
ample room for cleaning machines and handling the work, including material and scrap. The arrangement of machines shall be such that operators will not stand in aisles.
Aisles shall be provided of sufficient width to permit the free movement of employees bringing and removing material. This aisle space is to be independent of working and storage space.
Wood platforms used on the floor in front of machines shall be substantially constructed.
"Veneer machinery."
Sides of steam vats shall extend to a height of not less than 36 inches above the floor, working platform, or ground.
Large steam vats divided into sections shall be provided with substantial walkways between sections. Each walkway shall be provided with a standard handrail on each exposed side. These handrails may be removable, if necessary.
Covers shall be removed only from that portion of steaming vats on which men are working and a portable railing shall be placed at this point to protect the operators.
Workmen shall not ride or step on logs in steam vats.

[39 FR 23502, June 27, 1974, as amended at 49 FR 5322, Feb. 10, 1984; 61 FR 9227, March 7, 1996]

Next Standard (1910 Subpart E)

Regulations (Standards - 29 CFR) - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.