US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Regulations (Standards - 29 CFR) - Table of Contents
• Part Number: 1926
• Part Title: Safety and Health Regulations for Construction
• Subpart: R
• Subpart Title: Steel Erection
• Standard Number: 1926.761
• Title: Training.
• GPO Source: e-CFR


The following provisions supplement the requirements of § 1926.21 regarding the hazards addressed in this subpart.

1926.761(a)
Training personnel. Training required by this section shall be provided by a qualified person(s).
1926.761(b)
Fall hazard training. The employer shall train each employee exposed to a fall hazard in accordance with the requirements of this section. The employer shall institute a training program and ensure employee participation in the program.
1926.761(c)
Special training programs. In addition to the training required in paragraphs (a) and (b) of this section, the employer shall provide special training to employees engaged in the following activities.
1926.761(c)(1)
Multiple lift rigging procedure. The employer shall ensure that each employee who performs multiple lift rigging has been provided training in the following areas:
1926.761(c)(1)(i)
The nature of the hazards associated with multiple lifts; and
1926.761(c)(1)(ii)
The proper procedures and equipment to perform multiple lifts required by § 1926.753(e).
1926.761(c)(2)
Connector procedures. The employer shall ensure that each connector has been provided training in the following areas:
1926.761(c)(2)(i)
The nature of the hazards associated with connecting; and
1926.761(c)(2)(ii)
The establishment, access, proper connecting techniques and work practices required by § 1926.756(c) and § 1926.760(b).
1926.761(c)(3)
Controlled Decking Zone Procedures. Where CDZs are being used, the employer shall assure that each employee has been provided training in the following areas:
1926.761(c)(3)(i)
The nature of the hazards associated with work within a controlled decking zone; and
1926.761(c)(3)(ii)
The establishment, access, proper installation techniques and work practices required by § 1926.760(c) and § 1926.754(e).

[66 FR 5273, Jan. 18, 2001; 73 FR 75589, Dec. 12, 2008]

Next Standard (1926 Subpart R App A)

Regulations (Standards - 29 CFR) - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close