Regulations (Standards - 29 CFR) - Table of Contents|
| Part Number:||1915|
| Part Title:||Occup. Safety and Health Standards for Shipyard Employment|
| Subpart Title:||Gear and Equipment for Rigging and Materials Handling|
| Standard Number:||1915.114|
| Title:||Chain falls and pull-lifts.|
| GPO Source:||e-CFR|
The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking.
Chain falls and pull-lifts shall be clearly marked to show the capacity and the capacity shall not be exceeded.
Chain falls shall be regularly inspected to ensure that they are safe, particular attention being given to the lift chain, pinion, sheaves and hooks for distortion and wear. Pull-lifts shall be regularly inspected to ensure that they are safe, particular attention being given to the ratchet, pawl, chain and hooks for distortion and wear.
Straps, shackles, and the beam or overhead structure to which a chain fall or pull-lift is secured shall be of adequate strength to support the weight of load plus gear. The upper hook shall be moused or otherwise secured against coming free of its support.
Scaffolding shall not be used as a point of attachment for lifting devices such as tackles, chain falls, and pull-lifts unless the scaffolding is specifically designed for that purpose.
Next Standard (1915.115)|
|Regulations (Standards - 29 CFR) - Table of Contents|