OSHA News Release - Table of Contents|
Formed Fiber Technologies provides false abatement documentation,
continues to expose workers to serious hazards resulting in $816,500 fine
OSHA previously cited Ohio fabric manufacturing plant in October 2013
SIDNEY, Ohio – After providing false documentation and making false representations claiming that previously cited hazards related to hydraulic presses had been corrected, Formed Fiber Technologies LLC has been issued 14 safety citations, including willful and repeat citations, as well as a notice of failure to abate with proposed fines totaling $816,500. The U.S. Labor Department's Occupational Safety and Health Administration initiated the inspection as a follow-up inspection pursuant to its Severe Violators Enforcement Program.
The Sidney plant, which produces motor vehicle interior trimmings for automotive manufacturers, including Toyota and General Motors, was issued one failure to abate, nine willful and four repeat safety violations for continuously exposing employees to amputations* and other hazards.
"Formed Fiber Technologies apparently decided that production was more important than ensuring its workers' safety. They provided false abatement documentation to OSHA. They knew how hazardous these machines were without proper safeguards and also knew exactly how to fix those hazards," said Assistant Secretary of Labor for Occupational Safety and Health Dr. David Michaels. "OSHA will not tolerate such blatant disregard for worker safety."
OSHA's January follow-up inspection found that abatement documentation Formed Fiber provided to OSHA in December 2013 was false and that employees had been exposed to unguarded machines and unsafe maintenance procedures well after the employer's abatement claims. Failing to protect workers from dangerous machinery is among the most frequently cited OSHA violations and injuries involving this type of machinery often result in death or permanent disability.
Nine willful citations were issued for failing to prevent the start up of multiple hydraulic thermoforming presses, laminator machines and robot cells while workers were performing set-up, service and maintenance inside the machines. The company also failed to develop proper lockout/tag out procedures and encouraged workers to use unsafe methods to stop machines for maintenance. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirement, or plain indifference to employee safety and health.
Four repeat violations cited also involve failing to train workers on how to properly stop machines before service and maintenance, which continuously exposed machine operators to laceration, amputation, burns and having parts of the machine strike or crush them. The company failed to have identifying information on devices to indicate hazards.
A repeat violation exists when an employer has been previously cited for the same or a similar violation of a standard, regulation, rule or order at any facility in federal enforcement states within the last five years.
OSHA previously cited Formed Fiber Technologies in October 2013 for 11 violations, many involving the same standards. The company entered into a settlement agreement that included terms involving the abatement of hazards and paying a penalty of $69,000. Prior to October 2013, the company had been inspected by OSHA 16 times at their facilities nationwide, resulting in 80 violations being cited.
The current citations may be viewed at http://www.osha.gov/ooc/citations/FormedFiberTechnologies_956889_07_15_14.pdf*.
The company, based in Auburn, Maine, manufactures nonwoven fabrics and polyester staple fibers for the automotive industry. It employs 750 workers corporate wide, with 340 at the Sidney facility. Formed Fiber Technologies also operates Color-Fi Inc. in Sumter, South Carolina.
Formed Fiber Technologies has 15 business days from receipt of the citations and proposed penalties to comply, request an informal conference with OSHA's area director, or contest the findings before the independent Occupational Safety & Health Review Commission.
To ask questions; obtain compliance assistance; file a complaint or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Toledo Area Office at 419-259-7542.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
# # #
U.S. Department of Labor news materials are accessible at http://www.dol.gov. The department's Reasonable Accommodation Resource Center converts departmental information and documents into alternative formats, which include Braille and large print. For alternative format requests, please contact the department at (202) 693-7828 (voice) or (800) 877-8339 (federal relay).
* Accessibility Assistance Contact OSHA's Office of Communications at 202-693-1999 for assistance accessing PDF materials.
|OSHA News Release - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.