OSHA News Release - (Archived) Table of Contents|
ALBANY FIRM FACES FINE FOLLOWING FATAL ACCIDENT
ALBANY, N.Y. -- The Occupational Safety and Health Administration today proposed penalties totaling $64,100 to Yank Waste Company, Inc. of Albany, N.Y., following an investigation into a fatal accident that claimed the life of one worker on June 5, 2001.
OSHA Area Director John Tomich said that the tragedy could have been averted had the company utilized lockout/tagout procedures when an employee entered the shredder. The worker entered the shredder to perform routine cleaning before the machine was de-energized.
Lockout/tagout procedures should be followed during maintenance or repair operations to a machine. They ensure that power sources are locked in the "off " position and clearly marked with a tag so other workers will not turn the machine on by mistake.
"There is no reason why an employer should fail to recognize such a basic hazard as lockout/tagout." Tomich said. "The standard is clear, the hazard is very real, and the unfortunate consequences in this case were tragic, in that the accident was preventable."
OSHA also cited the company for allegedly failing to provide employees with adequate training in safe energy control procedures, failing to document energy control training, unsafe stacking of materials, inadequate maintenance of powered industrial trucks, use of an unguarded portable grinder, and employee exposure to electrical hazards. OSHA issued a willful violation to the firm for its failure to use group lockout/tagout procedures. Other citations were classified as serious.
OSHA defines a willful violation as one committed with an intentional disregard for, or plain indifference to, the requirements of the OSHA Act and its regulations. A serious violation is defined as a condition that exists where there is a substantial possibility that death or serious physical harm may result.
The firm has until December 21 to contest the citations and proposed penalties before the independent Occupational Safety and Health Review Commission. The OSHA Albany Area Office, 401 New Karner Road, telephone number 518-464-6742 conducted the investigation
# # #
|OSHA News Release - (Archived) Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.