OSHA News Release - Table of Contents|
US Labor Department's OSHA cites Extrudex Aluminum
after worker killed in North Jackson, Ohio, plant
Company also placed in OSHA's Severe Violator Enforcement Program
NORTH JACKSON, Ohio — The U.S. Department of Labor's Occupational Safety and Health Administration has cited Extrudex Aluminum Inc. with eight safety violations, including two willful, after a worker died when he became pinned by a rack containing hot aluminum parts when it tipped over in an oven at the facility on Oct. 30, 2012. Another worker was severely injured in the incident when he was burned by the hot parts.
"Extrudex Aluminum could have prevented this tragic loss by protecting workers from hazards unique to its operation," said Howard Eberts, OSHA's area director in Cleveland. "Workers should not be asked to take such risks, and OSHA will not tolerate such disregard for worker safety."
The two willful citations include exposing workers to struck-by, pinned-under and burned-by hazards from hot metal racks and hot aluminum products, which could weigh as much as 8,000 pounds, and for failing to provide sufficient, safe clearance for workers operating in oven one and oven two where aluminum extrusions are treated. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirement, or plain indifference to employee safety and health.
Six serious violations include failing to provide personal protective equipment in the hot ovens; have first aid responders at the facility; develop a written hazard assessment for unloading hot aluminum from the ovens; ensure the lockout procedure for oven one was utilized; conduct periodic inspections of energy control procedures; and address steps in emergency control procedures to dissipate stored thermal energy to a safe level. Additionally, the electrical emergency stop button for the door closest to the extrusion press was broken off on oven one. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.
Because of the hazards and the violations cited, Extrudex Aluminum Inc. has been placed in OSHA's Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. OSHA's SVEP focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. Under the program, OSHA may inspect any of the employer's facilities if it has reasonable grounds to believe there are similar violations.
Proposed fines total $175,000. The current citations may be viewed at http://www.osha.gov/ooc/citations/ExtrudexAluminum_715638_0423_13.PDF*
The company, headquartered in Canada, produces aluminum products for architectural, consumer and electrical uses. It operates two additional production plants in Canada and employs 152 workers at the North Jackson plant out of the 477 companywide. The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.
To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Cleveland Area Office at 216-615-4266.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
# # #
U.S. Department of Labor news materials are accessible at http://www.dol.gov. The information above is available in large print, Braille, audio tape or disc from the COAST office upon request by calling 202-693-7828 or TTY 202-693-7755.
* Accessibility Assistance Contact OSHA's Office of Communications at 202-693-1999 for assistance accessing PDF materials.
|OSHA News Release - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.