US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

OSHA News Release - Table of Contents
Trade News Release Banner Image

Region 5 News Release: 12-1985-CHI
Oct. 4, 2012
Contact: Scott Allen      Rhonda Burke
Phone:            312-353-6976

US Department of Labor's OSHA conducts follow-up inspection of Stroh
Precision Die Casting in Mauston, Wis.; finds 9 safety violations

MAUSTON, Wis. – The U.S. Department of Labor's Occupational Safety and Health Administration has cited Stroh Precision Die Casting for nine safety, including five repeat, violations at the company's Mauston facility. OSHA conducted an inspection in May as a follow-up to an August 2011 inspection that had resulted in citations for failing to provide appropriate protective equipment and train workers on hazardous chemicals, among other violations. Proposed fines for the most recent inspection total $51,590.

"Stroh Precision Die Casting is compromising the health and safety of its workers by allowing previously cited deficiencies to continue without correction," said Kim Stille, OSHA's area director in Madison. "Providing appropriate personal protective equipment and training to employees on its use is vital to their long-term safety and health. OSHA is committed to protecting workers on the job."

Specifically, the repeat violations are failing to provide appropriate hand protection, require workers to wear face protection, train workers on the use of personal protective equipment, properly label chemicals in the workplace and train workers on hazardous chemicals. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. Similar violations were cited based on the 2011 inspection.

Four serious safety violations involve failing to guard abrasive wheels, keep passageways clear from clutter, mount fire extinguishers and remove oil residue on floors to prevent workers from slipping. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Stroh Precision Die Casting employs about 90 workers at its Mauston facility. The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.

To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Madison Area Office at 608-441-5388.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit

# # #

U.S. Department of Labor news materials are accessible at The information above is available in large print, Braille or CD from the COAST office upon request by calling 202-693-7828 or TTY 202-693-7755.

OSHA News Release - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.