OSHA News Release - Table of Contents|
Region 2 News Release
Mon., Nov. 9, 2009
Contact: Ted Fitzgerald
US Labor Department's OSHA cites Brooklyn, NY, contractor for electrocution and fall hazards at Westchester County worksite
NEW YORK -- The U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) has proposed $50,600 in fines against Metro Steel Fabricators Inc., a Brooklyn steel erection contractor, for alleged willful and serious violations of safety standards at a Tuckahoe, N.Y., jobsite.
OSHA's inspection found that workers at the 30 Elm St. worksite were exposed to electrocution hazards while working within 10 feet of energized high-voltage power and service lines, while workers who were connecting steel beams without fall protection were exposed to falls of three stories.
"Falls and electrocutions are among the leading causes of death in construction work," said Diana Cortez, OSHA's area director in Tarrytown, N.Y. "Electricity can kill or injure instantly, while a momentary slip, trip or loss of balance can lead to a fatal or disabling plunge. There is no good reason for an employer's failure to provide these basic, commonsense and legally required safeguards at each and every jobsite."
The inspection also found that Metro Steel Fabricators was erecting steel without first receiving written verification that concrete footings were of sufficient strength to support the loads; a roadway workzone was improperly set up and lacked warning signs to tell motorists of a flagger and a crane in the roadway; and additional fall hazards stemmed from lack of perimeter safety cables and use of an incomplete stairway for access.
OSHA has issued Metro Steel Fabricators one willful citation, with a proposed fine of $35,000, for the electrocution hazard and seven serious citations, with $15,600 in fines, for the remaining items. OSHA defines a willful violation as one committed with plain indifference to or intentional disregard of employee safety and health. Serious citations are issued when death or serious physical harm is likely to result from hazards about which the employer knew or should have known.
"One means of preventing hazardous conditions is to establish an effective safety and health management system through which employers and employees work together to proactively evaluate, identify and eliminate hazards," said Robert Kulick, OSHA's regional administrator in New York.
Metro Steel Fabricators has 15 business days from receipt of its citations and proposed penalties to comply, meet with OSHA or contest the findings before the independent Occupational Safety and Health Review Commission. The inspection was conducted by OSHA's Tarrytown Area Office; telephone 914-524-7510.
Under the Occupational Safety and Health Act of 1970, OSHA's role is to promote safe and healthful working conditions for America's men and women by setting and enforcing standards, and providing training, outreach and education. For more information, visit http://www.osha.gov.
U.S. Department of Labor releases are accessible on the Internet at www.dol.gov. The information in this news release will be made available in alternate format (large print, Braille, audiotape or disc) from the COAST office upon request. Please specify which news release when placing your request at 202-693-7828 or TTY 202-693-7755. The Labor Department is committed to providing America's employers and employees with easy access to understandable information on how to comply with its laws and regulations. For more information, please visit www.dol.gov/compliance.
|OSHA News Release - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.