OSHA News Release - (Archived) Table of Contents|
OSHA News Release – Region 2
U.S. Department of Labor
Region 2 News Release: 08-165-NEW/BOS 2008-048
Thurs., Feb. 21, 2008
Contact: Ted Fitzgerald
SYRACUSE, N.Y. -- The U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) has cited an Auburn, N.Y., scrap metal recycling plant for a total of 22 alleged serious and repeat violations of safety standards following the Nov. 6, 2007, death of an employee who became caught in a conveyor belt. Auburn Metal Processing LLC, 6984 North Street Road, faces $44,100 in proposed fines.
OSHA's inspection found that conveyors and other machinery at the plant lacked adequate guarding to prevent employee contact with moving parts, and that hardware and procedures to lock out their power sources to prevent startup while employees worked on them were not supplied and used. The conveyors also lacked start-up alarms to warn employees.
"It's imperative that these safeguards be promptly, completely and effectively implemented to prevent this sort of accident from occurring again," said Christopher Adams, OSHA's area director in Syracuse.
In addition, OSHA's inspection identified a cross-section of hazards at the plant, including no program to regulate entry into permit-required confined spaces; the use of damaged forklift trucks; an uninspected and improperly maintained crane; damaged electrical cords; ungrounded electrical equipment; inadequate fire protection where flammable liquids were stored; and lack of reflective clothing for employees exposed to vehicular traffic after dark.
As a result, OSHA issued the plant 16 serious citations, with $23,100 in fines. OSHA defines a serious violation as a condition which exists where there is a substantial possibility that death or serious physical harm can result.
OSHA also issued the plant six repeat citations, with $21,000 in fines, for hazards similar to those cited during an earlier OSHA inspection. These included lack of backup alarms on loaders; failing to replenish spent fire extinguishers; unguarded open-sided floors and platforms; missing stair rails; improperly maintained air cleaning hoses; and additional instances of unguarded machinery. OSHA issues repeat citations when an employer has previously been cited for a substantially similar hazard and those citations have become final.
Auburn Metal Processing has 15 business days from receipt of its citations to request and participate in an informal conference with OSHA or to contest them before the independent Occupational Safety and Health Review Commission. The investigation was conducted by OSHA's Syracuse Area Office, 3300 Vickery Road, North Syracuse, N.Y.; telephone 315-451-0808.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to assure the safety and health of America's working men and women by setting and enforcing standards; providing training, outreach and education; establishing partnerships; and encouraging continual process improvement in workplace safety and health. For more information, visit www.osha.gov.
U.S. Department of Labor releases are accessible on the Internet at www.dol.gov. The information in this news release will be made available in alternate format (large print, Braille, audiotape or disc) from the COAST office upon request. Please specify which news release when placing your request at 202-693-7828 or TTY 202-693-7755. The Labor Department is committed to providing America's employers and employees with easy access to understandable information on how to comply with its laws and regulations. For more information, please visit www.dol.gov/compliance.
|OSHA News Release - (Archived) Table of Contents|