US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Alert: Due to technical difficulties with the website, some pages are temporarily unavailable.
To file a complaint with OSHA or to ask a safety and health question, call 1-800-321-6742 (OSHA).

OSHA News Release - (Archived) Table of Contents
Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.
Trade News Release Banner Image

Region 2 News Release:    06-1271-NEW/BOS 2006-213
Wednesday, August 2, 2006
Contact: Ted Fitzgerald
Phone: (617) 565-2074


OSHA Fines Brooklyn Foundry $144,750 for Safety and Health Hazards

NEW YORK -- Unguarded machinery, inadequate hearing protection, lead overexposures and a steam explosion hazard at a Brooklyn, N.Y., foundry have resulted in $144,750 in proposed fines from the U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA). J&J Bronze & Aluminum Casting Corp. was cited for a total of 33 alleged willful, serious and other-than-serious safety and health hazards following OSHA health and safety inspections that started on Feb. 2.

OSHA found that employees exposed to high noise levels were not provided an audiometric testing program and audiograms to measure possible hearing loss, and that saw blades and abrasive grinders were not guarded against employee contact. These conditions resulted in the issuance of three willful citations, which account for $99,000 of the total fines. OSHA defines a willful violation as one committed with an intentional disregard of, or plain indifference to, the requirements of the Occupational Safety and Health Act and regulations.

The company was also issued 28 serious citations, with $45,250 in fines for various health and safety hazards. A serious citation is issued when death or serious physical harm are likely to result from a hazard about which the employer knew or should have known.

Serious health hazards included employee overexposure to lead and the absence of work practices, engineering controls, respirators, a clean changing room, showers, medical surveillance, employee training and other required safeguards; a deficient hazard communication program; lack of hearing and eye protection; and no hearing conservation training.

Safety hazards included an obstructed exit route; lack of a program, procedures, equipment and employee training to prevent the accidental startup of machinery during maintenance; unguarded sanders, belts and pulleys; uninspected lifting hooks and slings; no fire extinguisher training; an unmaintained sprinkler system; and electrical hazards.

Chief among the safety hazards was a potential steam explosion hazard in the plant’s furnace and mold form areas that had a wet fire sprinkler system. Metal in these areas can be heated as high as 2100 degrees. If water from the sprinklers came in contact with the molten metal, the resulting pressure and steam could generate an explosive reaction.

The company was also issued two other-than-serious citations and fined $500 for failing to inform employees about available medical records and for failing to post the required summary of occupational injuries and illnesses.

J&J Bronze & Aluminum Casting Corp. has 15 business days from receipt of the citations to request and participate in an informal conference with the OSHA area director or to contest the citations before the independent Occupational Safety and Health Review Commission. The investigation was conducted by OSHA’s Manhattan, N.Y., area office, telephone (212) 620-3200.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing a safe and healthful workplace for their employees. OSHA’s role is to assure the safety and health of America’s working men and women by setting and enforcing standards; providing training, outreach and education; establishing partnerships; and encouraging continual process improvement in workplace safety and health. For more information, visit www.osha.gov.


###

U.S. Labor Department releases are accessible on the Internet at www.dol.gov. The information in this news release will be made available in alternate format upon request (large print, Braille, audio tape or disc) from the COAST office. Please specify which news release when placing your request. Call (202) 693-7765 or TTY (202) 693-7755. The U.S. Department of Labor is committed to providing America's employers and employees with easy access to understandable information on how to comply with its laws and regulations. For more information, please visit www.dol.gov/compliance.
Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

OSHA News Release - (Archived) Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close