Powered by GoogleTranslate
Standard Interpretations - Table of Contents
• Standard Number: 1926.501; 1926.603

November 2, 1995

Mr. Richard Marshall
Safety Director
Richard Goettle, Inc.
12071 Hamilton Avenue
Cincinnati, Ohio 45231

Dear Mr. Marshall:

This is in response to your letter of December 31, 1994, to the Occupational Safety and Health Administration (OSHA) in which you asked if the fall protection standards, 29 CFR 1926.500-503, effective February 6, 1995, supersede OSHA Instruction STD 3-13.1, dated January 31, 1978, concerning tying off of loft workers, top men and pile monks during sheet piling activities. You pointed out that 1926.603(a)(8) requires pile driving equipment with fixed leads to have attachment points for loft workers to engage their safety belt lanyards. OSHA has previously interpreted this requirement to mean that only employees working on pile driver fixed leads, and not employees working on top of sheet piling, were required to be tied off. You asked if this interpretation had changed with the publication of the new fall protection requirements.

With the publication of the new fall protection standard, Field Information Memorandum #75-12 and OSHA Program Directive #100-81 (renamed OSHA Instruction STD 3-13.1) were inadvertently superseded. As a result, the work activity in question now comes under 1926.501(b)(15), Walking/Working Surfaces Not Otherwise Addressed, since the requirement in 1926.603(a)(8) is simply to provide an attachment point for employees and is not a specific duty to use fall protection. However, in promulgating the new fall protection rule, OSHA did not become aware of any information that warrants changing the interpretation contained in the earlier documents and, consequently, the interpretation found in STD 3-13.1 is still valid. Restated, OSHA's interpretation is that fall protection is required for employees on pile driver fixed leads and for employees on sheet piling unless the employees are on a work platform equipped with guardrails or are using stirrups.

If you have any questions, please call me or Dale Cavanaugh of my staff at (202)219-8136.


Roy F. Gurnham, P.E., J.D.
Office of Construction and Maritime
Compliance Assistance

Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.