Standard Interpretations - Table of Contents|
| Standard Number:||1910.269; 1926.502|
September 1, 1995
Mr. Lance Murray
P.O. Box 85608
San Diego, California 92186-9784
Dear Mr. Murray:
Your letter addressed to Mr. James Foster, dated October 14, 1994, requesting an interpretation of the Occupational Safety and Health Administration (OSHA) standards addressing fall protection in the power distribution industry, (29 CFR 1910.269 and 29 CFR 1926.502) was forwarded to the Office of Construction and Maritime Compliance Assistance for response.
With regard to how the construction fall protection standard relates to maintenance operations, please be advised that the fall protection requirements contained in paragraph 1910.269 for maintenance activities are unaffected. The only change to 1910 was to paragraph 1910.269(g)(2). When the fall protection equipment criteria in 1926, Subpart E was revised and moved to Subpart M, the reference to 1926, Subpart E in paragraph 269(g)(2) was amended to reference the new fall protection equipment criteria in 1926, Subpart M. With this exception, all standards related to your maintenance operations remain the same.
If you have any further questions on this matter, please contact me or Mr. Dale Cavanaugh of my staff at (202) 219-8136.
Thank you for your interest in occupational safety and health.
Roy F. Gurnham, P.E., J.D.
Office of Construction and Maritime
|Standard Interpretations - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.