Standard Interpretations - (Archived) Table of Contents|
| Standard Number:||1910.119|
August 11, 1995
Joe Hudman, Ph.D, CHMM
Hudman & Associates, Inc.
P.O. Box 1506
Conroe, Texas 77305
Dear Mr. Hudman:
This is in response to your April 7, 1995 letter requesting interpretation of the Process Safety Management (PSM) standard 29 CFR 1910.119. Specifically, you requested clarification regarding the applicability of PSM to chemical distributors that merely store, transfer, and/or non mechanically blend flammable liquids.
The PSM standard applies to those processes containing 10,000 pounds or more of flammable liquids, with certain exceptions. Flammable liquids are defined as those liquids having flash points below 100 degrees fahrenheit.
The operations described in your letter appear to involve nothing more than storage of flammable liquids with subsequent transfer to other storage, including non mechanical, (agitation or stirring), blending. You further indicate that there is no chemical change or unit physical process such as distillation, mixing, filtering, evaporation, or drying. Under these circumstances, the operations you described, are not covered by the PSM standard. Please note that the exception at 29 CFR 1910.119(a)(1)(ii)(B), applies to those processes that only involve storage and associated transfer.
We appreciate your interest in occupational safety and health. If we can be of further assistance, please contact Ron Davies at (202)219-8041.
John B. Miles, Jr., Director
Directorate of Compliance Programs
|Standard Interpretations - (Archived) Table of Contents|