Standard Interpretations - (Archived) Table of Contents|
| Standard Number:||1910.1000|
April 19, 1995
R. J. Barnhart, Ph.D.
American Chrome and Chemicals Inc.
3800 Buddy Lawrence Drive
Post Office Box 9912
Corpus Christi, Texas 78469
Dear Dr. Barnhart:
You requested clarification of OSHA's current permissible exposure limit (PEL) for occupational exposure to hexavalent chromium in general industry.
OSHA's current PEL for chromic acid and chromates is found in Table Z-2 (29 CFR 1910.1000). This table specifies a ceiling limit of 100 micrograms per cubic meter of air (1.0 mg/10 m(3)), which covers all forms of hexavalent chromium [chromium (VI)] measured as chromium (VI) and reported as CrO(3). The entry has been unchanged since published in 1971.
There is no health basis for a less protective limit. This correspondence replaces any earlier interpretations concerning the PEL.
OSHA's interpretation is that the PEL for chromium (VI) in general industry is a ceiling value of 100 micrograms per cubic meter of air (100 ug/m(3)), measured as chromium (VI) and reported as CrO(3), as it is published. In the construction industry, the PEL is 100 ug/m(3) as an eight-hour, time-weighted-average.
A copy of this letter will be placed in the Hexavalent Chromium Docket (H-054-a) for further reference. OSHA will be addressing this issue in our forthcoming rulemaking on chromium (VI). If you have any questions, please do not hesitate to contact me at 202-219-7075.
John F. Martonik
Health Standards Programs
|Standard Interpretations - (Archived) Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.