Standard Interpretations - Table of Contents Standard Interpretations - (Archived) Table of Contents
• Status: Archived

Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

March 23, 1992

Mr. Del Schimpf President
Cardel, Inc.
P.O. Box 998
Loveland, Colorado 80539

Dear Mr. Schimpf:

This is in response to your February 23 letter requesting the Occupational Safety and Health Administration (OSHA) to recognize the Dump Boss Monitoring System as an accurate and reliable method of safely unloading the end dump semi-trailer. I apologize for the delay of this response.

As explained at our meeting with you on 12 February, it is the policy of the Occupational Safety and Health Administration not to approve or endorse products. The variable working conditions at jobsites and possible alteration or misapplication of an otherwise safe product could easily create a hazardous condition beyond the control of the product manufacturer. However, we have reviewed the information provided at the meeting and it appears the Dump Boss Monitoring System properly installed and maintained in accordance with the manufacturer's instructions, would provide an accurate and reliable method of safely unloading the end dump semi-trailers shown in your report.

If we can be of any further assistance, please contact Mr. Dale Cavanaugh of my staff at (202) 523-8124.

Sincerely,



Patricia K. Clark, Director
Directorate of Compliance Programs


Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.


Standard Interpretations - Table of Contents Standard Interpretations - (Archived) Table of Contents