Standard Interpretations - Table of Contents Standard Interpretations - (Archived) Table of Contents
• Standard Number: 1910.147
• Status: Archived

Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

January 16, 1990

Bruce Butterfield
Vice President
Public Affairs
Manufactured Housing Institute
1745 Jefferson David Highway
Arlington, Virginia 22202

Dear Mr. Butterfield:

This is in response to your letter of October 13, 1989 and to your second letter on the same subject dated December 29, 1989. Please accept my apology for the delay in response.

Your letters requested a clarification as to whether the members of your association are subject to the provisions of 29 CFR 1910.147, Control of Hazardous Energy Sources (lockout/tagout). A specific reference was made to the section of the standard that excludes the construction industry.

The manufactured home builders, which you indicate as your membership, is listed under Standard Industrial Classification (SIC) code 2451. While engaged in the manufacturing activities of this SIC code, the employees of your member manufacturing plants are afforded the protections under the "lockout/tagout" standard referenced above.

I hope this provides you with the information you requested. If you have any further questions, please contact me. Thank you for your interest in occupational safety and health.

Sincerely

Thomas J. Shepich, Director
Directorate of Compliance Programs


Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.


Standard Interpretations - Table of Contents Standard Interpretations - (Archived) Table of Contents