Powered by GoogleTranslate
Standard Interpretations - Table of Contents
• Standard Number: 1910.1200(f); 1910.1200(g)

October 26, 1987

Mr. Keith Doty
Hodges Manufacturing Company, Inc.
Route 4, Box 328B
Mountain Home, Arkansas 72653

Dear Mr. Doty:

This is an update to our response of October 1 to your inquiry concerning your labeling and material safety data sheet responsibilities under the expanded Hazard Communication Standard.

As you explained, your company manufactures stump removal equipment. Each stump router cutter head has carbide tips on the cutter teeth. Your customers sharpen the cutter teeth by grinding the carbide tips.

Since the cutter teeth are solid metal, the required label may be transmitted to your customers at the time of initial shipment and need not be included with subsequent shipment to the same employer unless the information on the label changes. The label may be transmitted with the initial shipment itself, or with appropriate material safety data sheets that are to be provided prior to or at the time of the first shipment. You may also affix the warning label on every cutter head guard of the machine. Such action may assist your customers in complying with the Hazard Communication Standard.

As discussed with Joyce Doty of your company, material safety data sheets are required for each hazardous chemical which could potentially present a physical or health hazard during the normal use of the product. Thus, a material safety data sheet would be necessary for the carbide tips. For the general metal components, however, a material safety data sheet would only be necessary if routine use or maintenance would likely involve exposure to metallic dust or fumes. Listing the general metal components of steel products is acceptable if a material safety data sheet is necessary. It is not a requirement to send material safety data sheets to nonmanufacturing customers who were shipped hazardous chemicals prior to September 23, 1987.

If you have further questions, please feel free to contact the Occupational Safety and Health Administration's (OSHA) office closest to you. The address and telephone number are:

U.S. Department of Labor - OSHA
Savers Building, Suite 828
320 West Capital Avenue
Little Rock, Arkansas 72201

I hope this information is helpful.


John A. Pendergrass
Assistant Secretary

Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.