US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Standard Interpretations - Table of Contents
• Standard Number: 1910.1200(f)

May 4, 1987

Mr. Peter E. Kelly
Director of Safety and
Health
Timber Products Manufacturers
951 East Third Avenue
Spokane, Washington 99202

Dear Mr. Kelly:

This is in response to your letter of April 14 regarding your company's labeling system which was designed to meet the requirements of the Occupational Safety and Health Administration's (OSHA) Hazard Communication Standard.

The Hazard Communication Standard requires employers to label each container of hazardous chemicals in the workplace with the following information:

(i) Identity of the hazardous chemical (s) contained therein; and

(ii) Appropriate hazard warnings.

In addition, if containers of hazardous chemicals are shipped, the name and address of the chemical manufacturer, importer, or other responsible party must also appear on the label.

The standard's preamble also recognizes the existence of the numerous labeling systems that are currently in use in industry. The intent of the standard is to permit the use of these systems as long as the employer's entire Hazard Communication Program (HCP) is effective. In assessing an employer's compliance with the standard, an OSHA compliance officer will evaluate the effectiveness of the employer's inplant labeling system through a review of the employer's material safety data sheets and training program. An effective program would be one that ensures that employees are aware of the hazardous effects of the chemicals they may be exposed to as well as meeting the other basic requirements of the standard. Hazard warnings used as part of inplant labeling systems, in combination with the HCP, are deemed to be effective when they promote safe handling and use of hazardous chemicals in the workplace.

From the label decal enclosed with your letter it appears that the chemical identity and health hazard warnings appear, in addition to a numerical hazard rating system. As long as the hazard warnings and/or ratings are correctly selected it appears your labeling system would meet the inplant labeling requirements of the Hazard Communication Standard. Please note that for shipped containers your labeling system could not rely on a numerical rating system and would have to be supplemented with the appropriate hazard warning(s) in a narrative form and include the target organ effect as well as the physical hazards of the chemicals.

If you have any further questions, please feel free to contact us again.

Sincerely,



John A. Pendergrass
Assistant Secretary


Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close