Powered by GoogleTranslate
Standard Interpretations - Table of Contents
• Standard Number: 1910.101

May 16, 1986

Ulrich H. Koch, Chief Engineer
Nupro Company
4800 East 345th Street
Willoughby, Ohio 44094

Dear Mr. Koch:

This is in response to your recent request for an interpretation of the acceptability of the Nupro 316-DC-RD cylinder valve, drawing enclosed, relative to the Occupational Safety and Health Administration (OSHA) regulations at 29 CFR 1910.

As you are aware, OSHA regulates the use of compressed gas cylinders on which an outlet valve is affixed, per 29 CFR 1910.101. Under that standard compressed gas cylinders are required, as a minimum, to comply with Compressed Gas Association (CGA) Pamphlets P-1-1965, C-6-1968 and C-8-1962. Further, the regulation requires that compressed gas cylinders have pressure relief devices in accordance with CGA Pamphlets S-1.1-1963 and 1965 addenda and S-1.2-1963.

The Occupational Safety and Health Act (the Act) was not intended to suppress the ingenuity of our industry, but rather to assure safe and healthful workplaces for our workers. In that regard, new technology which provides for improved safety, health and industrial productivity is not in conflict with the Act and may provide acceptable alternatives.

It is understood that, as a minimum, the Nupro valve (part number 316-DC-RD) is equipped as follows:

1. The pressure relief device conforms to the specifications of the CGA Pamphlets S-1.1-1963 and 1965 addenda, S-1.2-1963, and with 49 CFR 100-199.

2. The valve inlet connection conforms to the specifications of the American National Standards Institute, Inc. (ANSI B57.1-977) for a standard NGT thread.

3. The outlet connection utilizes a "keyed VCR" outlet fitting which meets the requirements of CGA Pamphlet P-1-1965, Section 3.4.

The OSHA standards at 29 CFR 1910.101(b) adopt the CGA Pamphlet P-1-1965, copy enclosed. A review of the adopted standard reveals that use of the Nupro valve, P/N 316-DC-RD, is not in conflict with the requirements. Therefore, proper use of the Nupro valve, P/N 316-DC-RD, is not in violation of the OSHA standards at 29 CFR 1910.101.

Alteration or misapplication of an otherwise safe piece of equipment could create a hazardous condition beyond the control of the manufacturer. Compliance of a device or process with the Act can only be determined by the safety or health professional when related to the specific use circumstances. Therefore, users of the Nupro valve with compressed gas cylinders should be cautioned to train employees in the proper applications of the valve in accord with manufacturer's recommendations and requirements. Procedural and administrative controls which assure employee safety and health are mandatory under the Act.

If we may be of further assistance, please contact me.


John B. Miles, Jr., Director
Directorate of Field Operations

Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.