Standard Interpretations - (Archived) Table of Contents|
| Standard Number:||1926.105|
|OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at http://www.osha.gov.|
July 30, 1975
Atlas Steel Erectors
Atlas Steel Erectors Company, Inc.
1798 Flatbush Avenue
Brooklyn, New York 11210
Dear Mr. Weinstein:
This is in response to your letter requesting clarification of the Standard 1926.105 on Safety Nets.
The OSHA Standard 1926.105(a) requires that nets be used "where use of ladders..., safety lines or safety belts is impractical." The language of the Standard seems to give preference to all other methods of safe guarding leaving safety nets as a last resort because no other safeguard can be used.
Please note that the OSHA Standard 1926.105 specifies 25 feet or less. The 30 foot figure comes from [1926.760] flooring requirements for steel erection which was changed from 25 to 30 feet on June 30, 1974.
Assistant Regional Director
Occupational Safety and Health
[Correction 6/20/2005. See OSHA Directive CPL 02-01-034 "Inspection policy and procedures for OSHA's steel erection standards for construction" published on 3/22/2002 for the current policy.]
|Standard Interpretations - (Archived) Table of Contents|