Standard Interpretations - Table of Contents|
| Standard Number:||1910.95|
29 CFR 1910.95
March 19, 1975
Leslie E. Anderson,
P.E. Chief Plant Engineer
1111 Allen Street
Jamestown, New York 14701
Dear Mr. Anderson:
Assistant Secretary John H. Stender has asked me to respond to your letter dated February 21, 1975, requesting a variance from Section 1910.95 Occupational Noise Exposure, of the Occupational Safety and Health Standards.
As you were advised in your telephone discussion with Mr. Ferguson of this office, we cannot consider your request for variance from Section 1910.95. This standard as written provides relief to an employer, if it is determined that there are no feasible engineering techniques available to reduce sound levels below the limits of Table G-16. Other provisions of the standard shall be utilized such as administrative controls and personal protective equipment to reduce sound levels below the limits of Table G-16.
In the event of a compliance inspection of your workplace, a copy of your engineering feasibility study and your plan to abate the noise problem should be made available to the compliance officer at the time of the inspection.
The utilization of administrative controls and personal protective equipment is mandatory until the engineering problems are solved.
No further action will be taken on your variance application. Any questions regarding this matter may be addressed to our Syracuse Area Director, Mr. Chester Whiteside, U.S. Department of Labor, Occupational Safety and Health Administration, Midtown Plaza - Room 203, 700 E. Water Street, Syracuse, New York 13210, telephone: (315) 473-2700.
Barry J. White
Associate Assistant Secretary for
|Standard Interpretations - Table of Contents|