Powered by GoogleTranslate
Federal Registers - Table of Contents
• Publication Date: 03/15/2017
• Publication Type: Notice
• Fed Register #: 82:13868-13870
• Standard Number: 1910.7
• Title: International Association of Plumbing and Mechanical Officials EGS: Application for Expansion of Recognition


  [Federal Register Volume 82, Number 49 (Wednesday, March 15, 2017)]
  [Notices]
  [Pages 13868-13870]
  From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
  [FR Doc No: 2017-05182]


  -----------------------------------------------------------------------

  DEPARTMENT OF LABOR

  Occupational Safety and Health Administration

  [Docket No. OSHA-2013-0030]


  International Association of Plumbing and Mechanical Officials
  EGS: Application for Expansion of Recognition

  AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

  ACTION: Notice.

  -----------------------------------------------------------------------

  SUMMARY: In this notice, OSHA announces the application of
  International Association of Plumbing and Mechanical Officials EGS
  (IAPMO) for expansion of its recognition as a Nationally Recognized
  Testing Laboratory (NRTL) and presents the Agency's preliminary finding
  to grant the application.

  DATES: Submit comments, information, and documents in response to this
  notice, or requests for an extension of time to make a submission, on
  or before March 30, 2017.

  ADDRESSES: Submit comments by any of the following methods:
      1. Electronically: Submit comments and attachments electronically
  at http://www.regulations.gov, which is the Federal eRulemaking Portal.
  Follow the instructions online for making electronic submissions.
      2. Facsimile: If submissions, including attachments, are not longer
  than 10 pages, commenters may fax them to the OSHA Docket Office at
  (202) 693-1648.
      3. Regular or express mail, hand delivery, or messenger (courier)
  service: Submit comments, requests, and any attachments to the OSHA
  Docket Office, Docket No. OSHA-2013-0030, Technical Data Center, U.S.
  Department of Labor, 200 Constitution Avenue NW., Room N-3508,
  Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
  5627). Note that security procedures may result in significant delays
  in receiving comments and other written materials by regular mail.
  Contact the OSHA Docket Office for information about security
  procedures concerning delivery of materials by express mail, hand
  delivery, or messenger service. The hours of operation for the OSHA
  Docket Office are 10: a.m.-3:00 p.m., e.t.
      4. Instructions: All submissions must include the Agency name and
  the OSHA docket number (OSHA-2013-0030). OSHA places comments and other
  materials, including any personal information, in the public docket

  without revision, and these materials will be available online at
  http://www.regulations.gov. Therefore, the Agency cautions commenters
  about submitting statements they do not want made available to the
  public, or submitting comments that contain personal information
  (either about themselves or others) such as Social Security numbers,
  birth dates, and medical data.
      5. Docket: To read or download submissions or other material in the
  docket, go to http://www.regulations.gov or the OSHA Docket Office at
  the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g.,
  copyrighted material) is not publicly available to read or download
  through the Web site. All submissions, including copyrighted material,
  are available for inspection at the OSHA Docket Office. Contact the
  OSHA Docket Office for assistance in locating docket submissions.
      6. Extension of comment period: Submit requests for an extension of
  the comment period on or before March 30, 2017 to the Office of
  Technical Programs and Coordination Activities, Directorate of
  Technical Support and Emergency Management, Occupational Safety and
  Health Administration, U.S. Department of Labor, 200 Constitution
  Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
  1644.

  FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
  available from the following sources:
      Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
  of Communications, U.S. Department of Labor, 200 Constitution Avenue
  NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
  email: meilinger.francis2@dol.gov.
      General and technical information: Contact Mr. Kevin Robinson,
  Director, Office of Technical Programs and Coordination Activities,
  Directorate of Technical Support and Emergency Management, Occupational
  Safety and Health Administration, U.S. Department of Labor, 200
  Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone:
  (202) 693-2110 or email: robinson.kevin@dol.gov.

  SUPPLEMENTARY INFORMATION:

  I. Notice of the Application for Expansion

      The Occupational Safety and Health Administration is providing
  notice that International Association of Plumbing and Mechanical
  Officials EGS (IAPMO) is applying for expansion of its current
  recognition as an NRTL. IAPMO requests the addition of four test
  standards to its NRTL scope of recognition.
      OSHA recognition of an NRTL signifies that the organization meets
  the requirements specified in 29 CFR 1910.7. Recognition is an
  acknowledgment that the organization can perform independent safety
  testing and certification of the specific products covered within its
  scope of recognition. Each NRTL's scope of recognition includes (1) the
  type of products the NRTL may test, with each type specified by its
  applicable test standard; and (2) the recognized site(s) that has/have
  the technical capability to perform the product-testing and product-
  certification activities for test standards within the NRTL's scope.
  Recognition is not a delegation or grant of government authority;
  however, recognition enables employers to use products approved by the
  NRTL to meet OSHA standards that require product testing and
  certification.
      The Agency processes applications by an NRTL for initial
  recognition and for an expansion or renewal of this recognition,
  following requirements in Appendix A to 29 CFR 1910.7. This appendix
  requires that the Agency publish two notices in the Federal Register in
  processing an application. In the first notice, OSHA announces the
  application and provides its preliminary finding. In the second notice,
  the Agency provides its final decision on the application. These
  notices set forth the NRTL's scope of recognition or modifications of
  that scope. OSHA maintains an informational Web page for each NRTL,
  including IAPMO, which details the NRTL's scope of recognition. These
  pages are available from the OSHA Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
      IAPMO currently has one facility (site) recognized by OSHA for
  product testing and certification, with its headquarters located at:
  International Association of Plumbing and Mechanical Officials EGS,
  5001 East Philadelphia Street, Ontario, CA 91761. A complete list of
  IAPMO's scope of recognition is available at https://www.osha.gov/dts/otpca/nrtl/iapmo.html.

  II. General Background on the Application

      On January 12, 2016, IAPMO submitted an application to expand its
  recognition to include eight additional test standards (OSHA-2013-0030-
  0006). OSHA staff performed a detailed analysis of the application
  packed and reviewed other pertinent information. OSHA also performed an
  on-site review of IAPMO's testing facility on March 1-2, 2016, in which
  assessors found some nonconformances with the requirements of 29 CFR
  1910.7. IAPMO addressed these issues sufficiently, and OSHA staff
  preliminarily determined that OSHA should grant the application to
  expand IAPMO's recognition to include four of the eight requested
  standards.
      Table 1 below lists the appropriate test standards found in IAPMO's
  application for expansion for testing and certification of products
  under the NRTL Program.

    Table 1--Proposed List of Appropriate Test Standards for Inclusion in
                      IAPMO's NRTL Scope of Recognition
  ------------------------------------------------------------------------
             Test standard                     Test standard title
  ------------------------------------------------------------------------
  UL 875............................  Standard for Electric Dry-Bath
                                       Heaters.
  UL 979............................  Standard for Water Treatment
                                       Appliances.
  UL 1241...........................  Standard for Junction Boxes for
                                       Swimming Pool Luminaires.
  UL 1261...........................  Standard for Electric Water Heaters
                                       for Pools and Tubs.
  ------------------------------------------------------------------------

  III. Preliminary Findings on the Application

      IAPMO submitted an acceptable application for expansion of its
  scope of recognition. OSHA's review of the application file, other
  pertinent documentation, and its detailed on-site assessment indicate
  that IAPMO can meet the requirements prescribed by 29 CFR 1910.7 for
  expanding its recognition to include the addition of these four test
  standards for NRTL testing and certification listed above. This
  preliminary finding does not constitute an interim or temporary
  approval of IAPMO's application.
      OSHA welcomes public comment as to whether IAPMO meets the
  requirements of 29 CFR 1910.7 for expansion of its recognition as an
  NRTL. Comments should consist of pertinent written documents and
  exhibits. Commenters needing more time to comment must submit a request
  in writing, stating the reasons for the request. Commenters must submit
  the written request for an extension by the due date for comments. OSHA
  will limit any extension to 10 days unless the requester justifies a
  longer period. OSHA may deny a request for an extension if the request
  is not adequately justified. To obtain or review copies of the exhibits
  identified in this notice, as well as comments submitted to the docket,
  contact the Docket Office,

  Room N-3508, Occupational Safety and Health Administration, U.S.
  Department of Labor, at the above address. These materials also are
  available online at http://www.regulations.gov under Docket No. OSHA-
  2013-0030.
      OSHA staff will review all comments to the docket submitted in a
  timely manner and, after addressing the issues raised by these
  comments, will recommend to the Assistant Secretary for Occupational
  Safety and Health whether to grant IAPMO's application for expansion of
  its scope of recognition. The Assistant Secretary will make the final
  decision on granting the application. In making this decision, the
  Assistant Secretary may undertake other proceedings prescribed in
  Appendix A to 29 CFR 1910.7.
      OSHA will publish a public notice of its final decision in the
  Federal Register.

  IV. Authority and Signature

      Dorothy Dougherty, Deputy Assistant Secretary of Labor for
  Occupational Safety and Health, 200 Constitution Avenue NW.,
  Washington, DC 20210, authorized the preparation of this notice.
  Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
  657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
  2012), and 29 CFR 1910.7.

      Signed at Washington, DC, on March 7, 2017.
  Dorothy Dougherty,
  Deputy Assistant Secretary of Labor for Occupational Safety and Health.
  [FR Doc. 2017-05182 Filed 3-14-17; 8:45 am]
   BILLING CODE 4510-26-P




Federal Registers - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close