Federal Registers - Table of Contents Federal Registers - Table of Contents
• Publication Date: 03/15/2007
• Publication Type: Notice
• Fed Register #: 72:12200-12202
• Standard Number: 1910.126
• Title: Standard on Additional Requirements for Special Dipping and Coating Operations (Dip Tanks); Extension of the Office of Management and Budget's Approval of Information Collection (Paperwork) Requirement

[Federal Register: March 15, 2007 (Volume 72, Number 50)]
[Notices]               
[Page 12200-12202]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr15mr07-101]                         

-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2007-0014]

Standard on Additional Requirements for Special Dipping and 
Coating Operations (Dip Tanks); Extension of the Office of Management 
and Budget's Approval of Information Collection (Paperwork) Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comment.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comment concerning its proposal to extend 
OMB approval of the information collection requirement specified in its 
standard on Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks) (29 CFR 1910.126(g)(4)). The provision is to 
ensure that employers make employees aware of the minimum distance 
between goods being electrostatically deteared.

DATES: Comments must be submitted (postmarked, sent, or received) by 
May 14, 2007.

ADDRESSES: Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit three copies of your comments 
and attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2007-
0014, U.S. Department of Labor, Occupational Safety and Health 
Administration, Room N-2625, 200 Constitution Avenue, NW., Washington, 
DC 20210. Deliveries (hand, express mail, messenger, and courier 
service) are accepted during the Department of Labor's and Docket 
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the ICR (OSHA Docket No. OSHA-2007-0014). All 
comments, including any personal information you provide, are placed in 
the public docket without change, and may be made available online at 
http:// www.regulations.gov. For further information on submitting 
comments see the "Public Participation" heading in the section of 
this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 
693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the Act or for developing information 
regarding the causes and prevention of occupational injuries, 
illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires 
that OSHA obtain such information with minimum burden upon employers, 
especially those operating small businesses, and to reduce to the 
maximum extent feasible unnecessary duplication of efforts in obtaining 
information (29 U.S.C. 657).
    The standard on Additional Requirements for Special Dipping and 
Coating Operations, 29 CFR 1910.126(g)(4)), requires employers to post 
a conspicuous sign near each piece of electrostatic detearing equipment 
that notifies employees of the minimum safe distance they must maintain 
between goods undergoing electrostatic detearing and the electrodes or 
conductors of the equipment used in the process. Doing so reduces the 
likelihood of igniting the explosive chemicals used in electrostatic 
detearing operations.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirement is 
necessary for the proper performance of the Agency's functions to 
protect employees, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirement, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirement contained in the Standard on Additional 
Requirements for Special Dipping and Coating Operations (Dip Tanks) (29 
CFR 1910.126(g)(4)). The Agency is requesting to retain its previous 
burden hour estimate of 1 hour. The Agency will summarize the comments 
submitted in response to this notice, and will include this summary in 
the request to OMB.
    Type of Review: Extension of currently approved information 
collection requirement.
    Title: Standard on Additional Requirements for Special Dipping and 
Coating Operations (Dip Tanks) (29 CFR 1910.126).
    OMB Number: 1218-0237.
    Affected Public: Business or other for-profit.
    Number of Respondents: 0.
    Frequency of Recordkeeping: On occasion.
    Total Responses: 1.
    Average Time Per Response: 0.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance). $0.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (FAX); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (OSHA Docket No. OSHA-2007-
0014). You may supplement electronic submissions by uploading document 
files electronically. If you wish to mail additional materials in 
reference to an electronic or facsimile submission, you must submit 
them to the OSHA Docket Office (see the section of this notice titled 
ADDRESSES). The additional materials must clearly identify your electronic 
comments by your name, date, and the docket number so the Agency can 
attach them to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov.
 Therefore, OSHA cautions commenters about submitting personal 
information such as social security numbers and date of birth. 
Although all submissions are listed in the http://www.regulations.gov
index, some information (e.g., copyrighted material) is not publicly 
available to read or download through this website. All submissions, 
including copyrighted material, are available for inspection and copying 
at the OSHA Docket Office. Information on using the http://www.regulations.gov 
Web site to submit comments and access the docket is available at the 
Web site's "User Tips" link. Contact the OSHA Docket Office for 
information about materials not available through the Web site, and 
for assistance in using the Internet to locate docket submissions.
    Electronic copies of this Federal Register document are available 
at http:// www.regulations.gov. This document as well as news releases 
and other relevant information also are available at OSHA's webpage at 
http://www.osha.gov.

V. Authority and Signature

    Edwin G. Foulke, Jr., Assistant Secretary of Labor for Occupational 
Safety and Health, directed the preparation of this notice. The 
authority for this notice is the Paperwork Reduction Act of 1995 (44 
U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 5-2002 (67 FR 
65008).

    Signed at Washington, DC, on March 9, 2007.
Edwin G. Foulke, Jr.
Assistant Secretary of Labor.
[FR Doc. E7-4702 Filed 3-14-07; 8:45 am]

BILLING CODE 4510-26-P

Federal Registers - Table of Contents Federal Registers - Table of Contents