Federal Registers - Table of Contents|
| Publication Date:||09/22/2004|
| Publication Type:||Notice|
| Fed Register #:||69:56795-56796|
| Standard Number:||1910.272|
| Title:||Grain Handling Facilities Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements|
Occupational Safety and Health Administration
[Docket No. ICR 1218-0206 (2004)]
Grain Handling Facilities Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comment.
SUMMARY: OSHA solicits comments concerning its request for an extension of the Information Collection Requirements contained in the Grain Handling Facilities Standard (29 CFR 1910.272). The purpose of these requirements is to establish safety practices, means, methods and operations for employees working in grain handling facilities.
DATES: Comments must be submitted by the following dates:
Hard copy: Your comments must be submitted (postmarked or received) by November 22, 2004.
Facsimile and electronic transmission: Your comments must be received by November 22, 2004.
ADDRESSES: You may submit comments, identified by OSHA Docket No. ICR-1218-0206(2004), by any of the following methods:
Regular mail, express delivery, hand delivery, and messenger service: Submit your comments and attachments to the OSHA Docket Office, Room N-2625, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 693-2350 (OSHA's TTY number is (877) 889-5627). OSHA Docket Office and Department of Labor hours are 8:15 a.m. to 4:45 p.m., ET.
Facsimile: If your comments are 10 pages or fewer in length, including attachments, you may fax them to the OSHA Docket Office at (202) 693-1648.
Electronic: You may submit comments through the Internet at http://ecomments.osha.gov. Follow instructions on the OSHA Web page for submitting comments.
Docket: For access to the docket to read or download comments or background materials, such as the complete Information Collection Request (ICR) (containing the Supporting Statement, OMB-83-I Form, and attachments), go to OSHA's Web page at http://OSHA.gov. In addition, comments, submissions and the ICR are available for inspection and copying at the OSHA Docket Office at the address above. You may also contact Todd Owen or Theda Kenney at the address below to obtain a copy of the ICR.
(For additional information on submitting comments, please see the "Public Participation" heading in the SUPPLEMENTARY INFORMATION section of this document.)
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance OSHA, Room N-3609, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202)693-2222.
I. Submission of Comments on This Notice and Internet Access to Comments and Submissions
You may submit comments and supporting materials in response to this notice by (1) hard copy, (2) FAX transmission (facsimile), or (3) electronically through the OSHA Web page. Because of security related problems there may be significant delay in the receipt of comments by regular mail. Please contact the OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627) for information about security procedures concerning the delivery of submissions by express delivery, hand delivery and courier service.
All comments, submissions and background documents are available for inspection and copying at the OSHA Docket Office at the above address. Comments and submissions posted on OSHA's Web page are available at http://www/OSHA.gov. Contact the OSHA Docket Office for information about materials not available through the OSHA Web page and for assistance using the Web page to locate docket submissions.
Electronic copies of this Federal Register notice as well as other relevant documents are available on OSHA's Web page.
The Department of Labor, as part of it continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)).
This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657).
The Grain Handling Facilities Standard (the Standard) (29 CFR 1910.272) specifies several paperwork requirements. The following sections describe what information is collected under each requirement, who uses the information, and how they use it.
Paragraph (d) of the standard requires the employer to develop and implement an emergency action plan so that employees will be aware of the appropriate actions to take in the event of an emergency.
Paragraph (e)(1) requires that employers provide training to employees at least annually and when changes in job assignment will expose them to new hazards.
Paragraph (f)(1) requires the employer to issue a permit for all hot work. Under paragraph (f)(2) the permit shall certify that the requirements contained in 1910.272(a) have been implemented prior to beginning the hot work operations and shall be kept on file until completion of the hot work operation.
Paragraph (g)(1)(i) requires the employer to issue a permit for entering bins, silos, or tanks unless the employer or the employer's representative is present during the entire operation. The permit shall certify that the precautions contained in paragraph (g) have been implemented prior to employees entering bins, silos or tanks and shall be kept on file until completion of the entry operations.
Paragraph (g)(4) requires the employer to implement procedures for the use of tags and locks which will prevent the inadvertent application of energy or motion to equipment being repaired, serviced, or adjusted.
Paragraphs (i)(1) and (i)(2) require the employer to inform contractors performing work at the grain handling facility of known potential fire and explosion hazards related to the contractor's work area and to explain to the contractor the applicable provisions of the emergency action plan.
Paragraph (j)(1) requires the employer to develop and implement a written housekeeping program that establishes the frequency and method(s) determined best to reduce accumulations of fugitive grain dust on ledges, floors, equipment, and other exposed surfaces.
The purpose of the housekeeping program is to require employers to have a planned course of action for the control and reduction of dust in grain handling facilities reducing the fuel available in a grain facility. The housekeeping program must specify in writing the frequency that housekeeping will be performed and the dust control methods that the employer believes will best reduce dust accumulations in the facility.
Under paragraph (m)(1), the employer is required to implement preventive maintenance procedures consisting of regularly scheduled inspections of at least the mechanical and safety control equipment associated with dryers, grain stream processing equipment, dust collection equipment including filer collectors, and bucket elevators. Paragraph (m)(3) requires a certification be maintained of each inspection.
III. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
- Whether the proposed information collection requirements are necessary for the proper performance of the Agency's functions, including whether the information is useful;
- The accuracy of OSHA's estimate of the burden (time and costs) of the information-collection requirements, including the validity of the methodology and assumptions used;
- The quality, utility, and clarity of the information collected; and
- Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques.
OSHA is proposing to extend the information collection requirements contained in the Grain Handling Facilities Standard (29 CFR 1910.272). The Agency will summarize the comments submitted in response to this notice, and will include this summary in its request to OMB to extend the approval of the information collection requirements contained in the Standard.
Type of Review: Extension of current approved information collection requirements.
Title: Grain Handling Facilities (29 CFR 1910.272).
OMB Number: 1218-0206.
Affected Public: Business or other for-profit; not-for-profit institutions; Federal government; State, local, or Tribal governments.
Number of Respondents: 19,791.
Frequency of Response: On occasion; monthly; annually.
Average Time per Response: Varies from 1 minute (2.0 hour) to maintain certification records to 3 hours to develop procedures for tags and locks.
Estimated Total Burden Hours: 69,336.
Estimated Cost (Operation and Maintenance): $0.
V. Authority and Signature
John L. Henshaw, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.), and Secretary of Labor's Order No. 5-2002 (67 FR 65008).
Signed at Washington, DC, on September 16, 2004.
John L. Henshaw,
Assistant Secretary of Labor.
[FR Doc. 04-21297 Filed 9-21-04; 8:45 am]
BILLING CODE 4510-26-M
|Federal Registers - Table of Contents|