Federal Registers - Table of Contents|
| Publication Date:||06/29/1999|
| Publication Type:||Notice|
| Fed Register #:||64:34829-34830|
| Standard Number:||1926.251(c)(15)(ii); 1911|
| Title:||Rigging Equipment -- Proof Testing of Welded End Wire Rope Attachment; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements.|
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. ICR-99-10]
Rigging Equipment -- Proof Testing of Welded End Wire Rope Attachment; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA); Labor.
ACTION: Notice of an opportunity for public comment.
SUMMARY: OSHA solicits comments concerning the proposed reduction, and extension of, the information collection requirements contained in the standard on Rigging Equipment -- Proof-Testing of Welded End Wire Rope Attachment (29 CFR 1926.251(c)(15)(ii)).
The Agency is particularly interested in comments on the following:
Whether the information collection requirements are necessary for the proper performance of the Agency's functions, including whether the information is useful;
The accuracy of the Agency's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;
The quality, utility, and clarity of the information collected; and
Ways to minimize the burden on employers who must comply, for example, by using automated, electronic, mechanical, and other technological information and transmission collection techniques.
DATES: Submit written comments on or before August 30, 1999.
ADDRESSES: Submit comments to the Docket Office, Docket No. ICR-99-10, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue NW, Washington, DC 20210; telephone: (202) 693-2350. You may transmit written comments 10 pages or less in length by facsimile to (202) 693-1648.
FOR FURTHER INFORMATION CONTACT: Kathleen Martinez, Directorate of Policy, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3605, 200 Constitution Avenue NW, Washington, DC 20210; telephone: (202) 693-2444. A copy of the Agency's Information Collection Request (ICR) supporting the need for the information collection requirements on Rigging Equipment -- Proof-Testing of Welded End Wire Rope attachments is available for inspection and copying in the Docket Office, or you may request a mailed copy by telephoning Kathleen Martinez at (202) 693-2444 or Barbara Bielaski at (202) 693- 2444. For electronic copies of the ICR on Rigging Equipment -- Proof- Testing of Welded End Wire Rope Attachment (29 CFR 1926.251(c)(15)(ii)), contact OSHA on the Internet at http://www.osha.gov.
The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden, conducts a preclearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments clearly understood, and the[[Page 34830]] impact of information collection requirements on respondents can be properly assessed. The Occupational Safety and Health Act of 1970 (the Act) authorizes information collection by employers as necessary or appropriate for enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657).
II. Proposed Actions
Paragraph (c)(15)(ii) of 29 CFR 1926.251 requires employers to retain a certificate of proof-test from the manufacturer. The retention of manufacturer certificates is necessary to assure proof-testing of the welded end wire rope attachment and also to assure testing of all welded end attachments at twice their rated capacity.
OSHA will summarize the comments submitted in response to this notice, and will include this summary in the request to OMB to extend the approval of the information collection requirements contained in the Rigging Equipment -- Proof testing of Welded End Wire Rope Attachment (29 CFR 1926.251(c)(15)(ii)).
Type of Review: Extension of currently approved information collection requirements.
Agency: Occupational Safety and Health Administration.
Title: Rigging Equipment -- Proof testing of Welded End Wire Rope Attachment (29 CFR 1926.251(c)(15)(ii)).
OMB Number: 1218-0233.
Affected Public: Business or other for-profit; Federal government; state, local or tribal government.
Number of Respondents: 18,940.
Frequency: On occasion.
Average Time per Response: 5 minutes.
Estimated Total Burden Hours: 1,515 hours.
III. Authority and Signature
Charles N. Jeffress, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506), Secretary of Labor's Order No. 6-96 (62 FR 111), and 29 CFR part 1911.
Signed at Washington, DC, this 21st day of June, 1999.
Charles N. Jeffress,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 99-16311 Filed 6-28-99; 8:45 am]
BILLING CODE 4510-26-M
|Federal Registers - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.