Federal Registers - Table of Contents|
| Publication Date:||07/14/1997|
| Publication Type:||Notice|
| Fed Register #:||62:37626-37627|
| Standard Number:||1910.177|
| Title:||Agency Information Collection Activities; Proposed Collection;Comment Request; Restraining Devices for Servicing Large Vehicle Multi-piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv))-- Manufacturer's Certification of Structural or Welding Repairs|
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. ICR-97-32]
Agency Information Collection Activities; Proposed Collection; Comment Request; Restraining Devices for Servicing Large Vehicle Multi- piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)) -- Manufacturer's Certification of Structural or Welding Repairs
SUMMARY: The Department of Labor, as part of its continuing effort to
reduce paperwork and respondent burden conducts a preclearance
consultation program to provide the general public and Federal agencies
with an opportunity to comment on proposed and/or continuing
collections of information in accordance with the Paperwork Reduction
Act of 1995 (PRA 95) (44 U.S.C. 3506(c)(2)(A)). This program helps to
ensure that requested data can be provided in the desired format,
reporting burden (time and financial resources) is minimized,
collection instruments are clearly understood, and impact of collection
requirements on respondents can be properly assessed. Currently, the
Occupational Safety and Health Administration (OSHA) is soliciting
comments concerning the proposed approval of the information collection
requirements contained at 29 CFR 1910.177(d)(3)(iv). The Agency is
particularly interested in comments which:
DATES: Written comments must be submitted on or before September 12, 1997.
ADDRESSES: Comments are to be submitted to the Docket Office, Docket No. ICR-97-32, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210. Telephone: (202) 219-7894. Written comments limited to 10 pages or less in length may also be transmitted by facsimile to (202) 219-5046.
FOR FURTHER INFORMATION CONTACT: Richard Sauger, Directorate of Safety Standards Programs, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3605, 200 Constitution Avenue, NW., Washington, DC 20210. Telephone: (202) 219-7202, Ext. 137. Copies of the referenced information collection request are available for inspection and copying in the Docket Office and will be mailed to persons who request copies by telephoning Theda Kennedy at (202) 219- 8061, ext. 100, or Barbara Bielaski at (202) 219-8076, ext. 142. For electronic copies of the Information Collection Request on the certification provision of Servicing Multi-piece and Single Piece Rim Wheels, contact OSHA's WebPage on the Internet at http://www.osha.gov/ and click on "standards."
The Occupational Safety and Health Act of 1970 (the Act) authorizes the promulgation of such health and safety standards as are necessary or appropriate to provide safe or healthful employment and places of employment. The statute specifically authorizes information collection by employers as necessary or appropriate for the enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents.
The inspection certification records required in 29 CFR 1910.177(d)(3)(iv) are necessary to assure compliance with the requirement for multi-piece and single piece rim wheels. Included in that standard is a requirement for the employer to ensure that restraining devices and barriers (restraining devices or restraints) are used when large vehicle tires are inflated. Each device is required to be inspected prior to each day's use and after any accident. Any restraining device that is damaged must be immediately removed from service. Any damaged restraining device that has been removed from service. Any damaged restraining device that has been removed from service cannot be reused until it is repaired and reinspected. When the repairs require component replacement or rewelding, the repaired device must be certified by the manufacturer or a registered professional engineer as meeting the strength requirements of 29 CFR 1910.177(d)(3)(iv).
II. Current Actions
This notice requests an extension of the current Office of Management and Budget (OMB) approval of the inspection certification requirement contained in 29 CFR 1910.177(d)(3)(iv) -- Servicing Multi- piece and Single Piece Rim Wheels (currently approved under OMB Control No. 1218-0210).
Type of Review: Extension.
Agency: U.S. Department of Labor, Occupational Safety and Health Administration.
Title: Servicing Multi-piece and Single Piece Rim Wheels.
OMB Number: 1218.
Agency Number: ICR-37-32.
Affected Public: State of local governments; Business or other for- profit.
Number of Respondents: 80.
Estimated Total Burden Hours: 6 hours.
Total Annualized Capital/Startup Costs: $0.
Signed at Washington, D.C., this 7th day of July 1997.
John F. Martonik,
Acting Director, Directorate of Safety Standards Programs.
[FR Doc. 97-18401 Filed 7-11-97; 8:45 am)
|Federal Registers - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.