Federal Registers - Table of Contents|
| Publication Date:||07/02/1997|
| Publication Type:||Notice|
| Fed Register #:||62:35838-35839|
| Standard Number:||1910.218(a)(2)(i); 1910.218(a)(2)(ii)|
| Title:||Agency Information Collection Activities; Proposed Collection;Comment Request; Forging Machines (29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii))--Inspection Certifications|
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. ICR-97-38]
Agency Information Collection Activities; Proposed Collection; Comment Request; Forging Machines (29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii)) -- Inspection Certifications
SUMMARY: The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden conducts a preclearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and/or continuing collections of information in accordance with the Paperwork Reduction Act of 1995 (PRA 95) (44 U.S.C. 3506(c)(2)(A)). This program helps to ensure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and impact of collection requirements on respondents can be properly assessed. Currently, the Occupational Safety and Health Administration (OSHA) is soliciting comments concerning the proposed extension of the information collection requirements contained in 29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii). The Agency is particularly interested in comments which:
DATES: Written comments must be submitted on or before September 2, 1997.
ADDRESSES: Comments are to be submitted to the Docket Office, Docket No. ICR-7-38, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue, NW, Washington, D.C. 20210. Telephone: (202) 219-7894. Written comments limited to 10 pages or less in length may also be transmitted by facsimile to (202) 219-5046.
FOR SUPPLEMENTARY INFORMATION CONTACT: Belinda Cannon, Directorate of Safety Standards Programs, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3605, 200 Constitution Avenue, NW, Washington, D.C. 20210, telephone: (202) 219-8161. Copies of the referenced information collection request are available for inspection and copying in the Docket Office and will be mailed to persons who request copies by telephoning Theda Kenney at (202) 219-8061, ext. 100, or Barbara Bielaski at (202) 219-8076, ext. 142. For electronic copies of the Information Collection Request on the certification provisions of Forging Machines, contact OSHA's WebPage on the Internet at http://www.osha.gov/ and click on standards.
The Occupational Safety and Health Act of 1970 (the Act) authorizes the promulgation of such health and safety standards as are necessary or appropriate to provide safe or healthful employment and places of employment. The statute specifically authorizes information collection by employers as necessary or appropriate for the enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents.
The inspection certification records required in 29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii) are necessary to assure compliance with the requirement for forging machines. They are intended to assure that the forging machines have periodic and regular maintenance checks and that guards and point of operation protection devices have scheduled and recorded inspections.
II. Current Actions
This notice requests an extension of the current Office of Management and Budget (OMB) approval of the inspection certification requirements contained in 29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii) -- Forging Machines (currently approved under OMB Control No. 1218-0210).
Type of Review: Extension.
Agency: U.S. Department of Labor, Occupational Safety and Health Administration.
Title: Forging Machine (29 CFR 1910.218(a)(2)(i) and 29 CFR 1910.218(a)(2)(ii)) -- Inspection Certifications.
OMB Number: 1218 -- .
Agency Number: Docket Number ICR-97-38.
Affected Public: State of local governments; Business or other for-profit.
Number of Respondents: 27,700.
Average Time per Response: 0.17 hour.
Estimated Total Burden Hours: 224,868.
Total Annualized Capital/Startup Costs: $0.
Signed at Washington, D.C., this 25th day of June 1997.
John F. Martonik,
Acting Director, Directorate of Safety Standards Programs.
[FR Doc. 97-17352 Filed 7-1-97; 8:45 am)
|Federal Registers - Table of Contents|