Federal Registers - Table of Contents|
| Publication Date:||09/21/1994|
| Publication Type:||Notice|
| Fed Register #:||59:48454|
| Title:||Vermont State Standards; Approval|
DEPARTMENT OF LABOR
Vermont State Standards; Approval
Part 1953 of Title 29, Code of Federal Regulations, prescribes procedures under Section 18 of the Occupational Safety and Health Act of 1970 (hereinafter called the Act) by which the Regional Administrator for Occupational Safety and Health (hereinafter called Regional Administrator) under a delegation of authority from the Assistant Secretary of Labor for Occupational Safety and Health (hereinafter called the Assistant Secretary), (29 CFR 1953.4), will review and approve standards promulgated pursuant to a State Plan, which has been approved in accordance with Section 18(c) of the Act and 29 CFR Part 1902. On October 16, 1973, notice was published in the Federal Register (38 FR 28658) of the approval of the Vermont State Plan and the adoption of Subpart U to Part 1952 containing the decision.
The Vermont State Plan provides for the adoption of Federal standards as State standards after:
a. Publishing for two (2) successive weeks, in three (3) newspapers having general circulation in the center, northern and southern parts of the State, an intent to amend the State Plan by adopting the standard(s).
b. Review of standards by the Interagency Committee on Administrative Rules, State of Vermont.
c. Approval by the Legislative Committee on Administrative Rules, State of Vermont.
d. Filing in the Office of the Secretary of State, State of Vermont.
e. The Secretary of State publishing, not less than quarterly, a bulletin of all standard(s) adopted by the State.
The Vermont State Plan provides for the adoption of State standards which are at least as effective as comparable Federal standards promulgated under Section 6 of the Act. By letter dated June 2, 1994, from Mary S. Hooper, Commissioner, Vermont Department of Labor and Industry, to John B. Miles, Jr., Regional Administrator; and incorporated as part of the plan, the State submitted updated State standards identical to 29 CFR Parts 1910, and 1926, and subsequent amendments thereto, as described below:
(1) Revision to 29 CFR Parts 1910, Safety and Health Standards:
Welding, Cutting and Brazing; Final Rule (55 FR 13696, dated 4/11/90).
(2) Addition to 29 CFR Parts 1910 and 1926, Incorporation of General Industry Safety and Health Standards applicable to Construction Work and Technical Amendments; Final Rules (58 FR 35077, dated 6/30/ 93).
These standards became effective on May 12, 1994, pursuant to Section 224 of State Law.
The above State standards have been reviewed and compared with the relevant Federal standard. It has been determined that the State standard is identical to the Federal standard, and is accordingly approved.
3. Location of Supplement for Inspection and Copying
A copy of the standards supplement, along with the approved plan, may be inspected and copied during normal business hours at the following locations: Office of the Regional Administrator, 133 Portland Street, Boston, Massachusetts 02114; Office of the Commissioner, State of Vermont, Department of Labor and Industry, 120 State Street, Montpelier, Vermont 05602; and the Office of State Programs, 200 Constitution Avenue, NW, Room N-3700, Washington, DC 20210.
4. Public Participation
Under 29 CFR 1953.2(c), the Assistant Secretary may prescribe alternative procedures to expedite the review process or for other good cause which may be consistent with applicable laws. The Assistant Secretary finds that good cause exists for not publishing the supplement to the Vermont State Plan as a proposed change and making the Regional Administrator's approval effective upon publication for the following reason:
1. The standards were adopted in accordance with the procedural requirements of the State Law which included public comment, and further public participation would be repetitious.
Authority: Sec. 18, Pub. L. 91-596, 84 Stat. 1608 (29 U.S.C. 667).
Cindy A. Coe,
Acting Regional Administrator.
[FR Doc. 94-23347 Filed 9-20-94; 8:45 am]
|Federal Registers - Table of Contents|
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.