Powered by GoogleTranslate
Directives - Table of Contents
• Record Type: Instruction
• Directive Number: STD 01-03-002
• Old Directive Number: STD 1-3.2
• Title: Hunt-Pierce Servi-Lift #9-271 Aerial Lift
• Information Date: 03/21/1979
• Standard Number: 1910.67

OSHA Instruction STD 1-3.2 March 21, 1979 Office of Compliance Programming


SUBJECT: Hunt-Pierce Servi-Lift #9-271 Aerial Lift

A. Purpose. This instruction requires that the six torque plate bolts which hold the torque plate that joins the upper and lower booms of the Servi-Lift must be in place and properly secured.

B. Scope. This instruction applies OSHA-wide.

C. Action. CSHO's during inspections shall ensure that any missing or loose torque plate bolts is a recognized hazard and shall be corrected immediately.

D. Background. It has been brought to OSHA's attention that a problem could exist for employees working in and around the Hunt-Pierce Servi-Lift #9-271 aerial lift. Serious accidents may occur because of inadequate and/or improper preventive maintenance routines coupled with insufficient daily inspections of the equipment by its operators and its maintenance team to insure safe operation.

Eula Bingham Assistant Secretary Occupational Safety and Health

DISTRIBUTION: National, Regional and Area Offices State Designees NIOSH Regional Program Directors

Directives - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.