Powered by GoogleTranslate
Directives - Table of Contents
• Record Type: Instruction
• Directive Number: STD 01-12-018
• Old Directive Number: STD 1-12.18
• Title: 29 CFR 1910.213(c)(l) and (h)(1), Woodworking Machinery Guarding Requirements
• Information Date: 10/30/1978
• Standard Number: 1910.213(c)(1); 1910.213(h)(1)

OSHA Instruction October 30, 1978 STD 1-12.18

January 31. 1978




Subject: 29 CFR 1910.213(c)(1)and (h)(1), Woodworking Machinery Guarding Requirements

1. Purpose

The purpose of this directive is to provide guidance in the application of 29 CFR 1910.213 by specifying the application of paragraph (c)(1) to hand-fed ripsaws and paragraphs (g)(1) and (h)(1) to swing cutoff saws and radial saws.

2. Documentation Affected

This directive supersedes and cancels OSHA Program Directive #100-45 dated January 23, 1976, and OSHA Field Information Memorandums #76-2A dated January 28, 1976, and #77-5 dated February 17, 1977.

3. Background

This directive was developed to inform field personnel of the alternate methods of meeting the intent of 29CFR 1910.213(c)(1), (g)(1) and (h)(1) to eliminate employee exposure to point of operation hazards.

4. Action

a. In those instances where fixed enclosures, fized barrier guards, or manually adjusted guards are used that provide protection equivalent to the protection of automatically adjusted guards, thereby preventing employee exposure to the saw blade, no citation shall be issued.
b. Accordingly, when a fixed enclosure, fixed barrier, or manually adjusted guard is used instead of an automatic guard, it shall be considered de minimus. That is, provided the guards are used in accord with manufacturer's instructions and under sufficient supervision to insure consistent compliance with these instructions.


OSHA Instruction October 30, 1978 STD 1-12.18

5. Effective Date

This directive is effective immediately and will remain in effect until canceled or superseded.

Richard P. Wilson Deputy Director, Federal Compliance and State Programs


A-1 E-1 B-2 HEW-1 C-1 NIOSH Regional Directors-1 D-4&5 NACOSH-1 Training Institute-4

(Originator OCCS)

Directives - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.