OSHA News Release - Table of Contents|
OSHA News Release – Region 2
U.S. Department of Labor
Region 2 News Release: 11-1586-NEW/BOS 2011-372
Nov. 4, 2011
Contact: Ted Fitzgerald
US Labor Department's OSHA cites Metalico Rochester Inc. following
worker's death at Rochester, NY, recycling facility
Employer issued repeat citations for inadequate hazardous energy control
BUFFALO, N.Y. – The U.S. Department of Labor's Occupational Safety and Health Administration has cited Metalico Rochester Inc. for alleged repeat and serious violations of workplace safety standards following the death of an employee at its 50 Portland Ave. recycling facility in Rochester, N.Y. The worker, who operated a large baler, was fatally crushed on June 4 when the machine unexpectedly activated while he was clearing material and he became caught between the baler's pusher block/ram and its return cavity.
The inspection by OSHA's Buffalo Area Office found that the company had not developed and used procedures to lock out the baler's power source and also did not provide workers with the required training on those procedures. OSHA's hazardous energy control standard requires that machines be shut down and their power sources locked or tagged out to prevent them from activating while workers are cleaning or performing maintenance on them.
"This is exactly the type of needless and devastating incident that hazardous energy control procedures are designed to prevent," said Arthur Dube, OSHA's area director for western New York. "Proper training and procedures would have equipped this worker with the knowledge to recognize the crushing hazard and prevent it in the first place."
OSHA had cited Metalico Rochester Inc. in March 2010 for similar hazards at a Pittsburgh, Penn., location. The recurrence of those conditions in this case resulted in citations for two repeat violations. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. Additionally, one serious violation was cited for not providing safe access to the baler. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.
"One means by which employers can prevent new and recurring hazards is for them to work proactively and cooperatively with their employees to develop, implement and effectively maintain an illness and injury prevention program," said Robert Kulick, OSHA's regional director in New York.
Detailed information on controlling hazardous energy, including an interactive eTool, is available for workers and employers online at http://www.osha.gov/SLTC/controlhazardousenergy/index.html.
Proposed penalties total $73,300. Metalico Rochester Inc. has 15 business days from receipt of its citations and proposed penalties to comply, meet with OSHA's Buffalo area director or contest the findings to the independent Occupational Safety and Health Review Commission. To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Buffalo office at 716-551-3053.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
U.S. Department of Labor news materials are accessible at http://www.dol.gov. The information above is available in large print, Braille, audio tape or disc from the COAST office upon request by calling 202-693-7828 or TTY 202-693-7755.
|OSHA News Release - Table of Contents|