TranslateViolation Detail
Standard Cited:5A0001 OSH Act General Duty Paragraph
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 1393048.015 | Citation: 01001 | Issuance: 09/26/2019 | ReportingID: 0418300 | ||
| Viol Type: | Serious | NrInstances: | 1 | Contest Date: | 10/18/2019 |
| Abatement Date: | 03/13/2020 2 | Nr Exposed: | 4 | Final Order: | 03/13/2020 |
| Initial Penalty: | $13,260.00 | REC: | A | Emphasis: | |
| Current Penalty: | $6,500.00 | Gravity: | 10 | Haz Category: | |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 09/26/2019 | $13,260.00 | 10/23/2019 | Serious | ||
| Penalty | : | 10/22/2019 | $13,260.00 | 10/23/2019 | Serious | ||
| Penalty | J: ALJ Decision | 03/13/2020 | $6,500.00 | 03/13/2020 | Serious | ||
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees when employees were exposed to struck-by hazards when the cut-off saw became pinched or bound while cutting: (a) On or about April 9, 2019 - Garner Road, Hartselle, AL, employees were exposed to struck-by hazards when using a STIHL TS 420 Cut-Off Machine (saw) to cut pipe, on the ground, with the upper quadrant of the wheel.