Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Violation Detail

Standard Cited:5A0001 OSH Act General Duty Paragraph

Violation Items

Nr: 1360590.015 Citation: 01005 Issuance: 04/05/2019 ReportingID: 0728500

Viol Type:Serious NrInstances:1 Contest Date:
Abatement Date:07/01/2019 2 Nr Exposed:2 Final Order:04/29/2019
Initial Penalty: $9,282.00 REC:A Emphasis:
Current Penalty: $6,200.00 Gravity:10 Haz Category:

Penalty and Failure to Abate Event History
Type Event Date Penalty Abatement Type FTA Insp
Penalty Z: Issued 04/05/2019 $9,282.00 05/01/2019 Serious  
Penalty I: Informal Settlement 04/29/2019 $6,200.00 07/01/2019 Serious  

Text For Citation: 01 Item/Group: 005 Hazard:

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: The employer is failing to protect employees from potential permanent disabling injuries such as but not limited to broken bones, electric shock, or death as a result of a struck-by and electrocution hazard as a result of using the Cleasby Truck-Mounted Conveyor that had a missing rotation function lever. This was most recently documented on November 6, 2017 at the jobsite located at 5699 Indian Trace Road, in Osage Beach, Missouri when the employer did not ensure the rotation function lever was present and in working condition. AMONG OTHER METHODS, FEASIBLE AND ACCEPTABLE ABATEMENT METHODS TO CORRECT THIS HAZARD ARE: 1) Ensure daily maintenance as described by the manufacturer on page 4-1 of Cleasby instruction manual is conducted. 2) Ensure conveyor controls are functioning, inspected and repaired as per page 3-2 #11 of Cleasby instruction manual. 3) Perform inspections of Cleasby truck mounted conveyor as per the manufacturer's inspection list, page 2 of 3. "Check control valve handles an labels, replace as necessary" 4) Train employees to recognize deficiencies, broken or missing parts that may result in the Cleasby Truck-Mounted Conveyor to operate in an unsafe manner, and to report to management those deficiencies, broken or missing parts. 5) Ensure that when deficiencies, missing or broken parts are reported that the vehicle is taken out of service until it fixed or repaired and can operate as per manufacturer's specifications.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close