Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED
Inspection: 943080.015 - Overhead Door Corporation-Wayne Dalton

Inspection Information - Office: Columbus

Nr: 943080.015Report ID: 0522500Open Date: 10/09/2013

Overhead Door Corporation-Wayne Dalton
1 Door Drive
Mount Hope, OH 44660
Union Status: NonUnion
NAICS: 332321/Metal Window and Door Manufacturing
Mailing: 1 Door Drive, Mount Hope, OH 44660

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:10/09/2013
Emphasis: N:AmputateClose Case:03/13/2014

Related Activity:TypeIDSafetyHealth
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 3 3
Initial Penalty $19,500 $0 $0 $0 $0 $19,500
Current Penalty $19,500 $0 $0 $0 $0 $19,500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100147 C04 II B 02/06/2014 03/14/2014 $7,000 $7,000 $0 I - Informal Settlement
  2. 01002 Serious 19100212 A01 02/06/2014 03/05/2014 $7,000 $7,000 $0 I - Informal Settlement
  3. 01003 Serious 19100212 A02 02/06/2014 03/05/2014 $5,500 $5,500 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 53206.015Event: 10/08/2013Employee Is Struck By Heavy Wire And Is Killed
At 3 p.m. on October 8, 2013, Employee #1, a spring winder machine operator, reversed a .331 gauge metal coil wire from the drive wheels of the winder due to a kink in the end of the wire. The wire was backed into an interlocked cage that surrounded the uncoiler. The employee set the brake on the uncoiler and entered the interlocked cage door in order to cut the wire with hydraulic cutters. The operator made a cut with the hydraulic cutters just on the inside of the cage, causing the stored energy that was put on the wire from reversing it to kick back. Employee #1 was struck in the neck by the wire and killed.
Keywords: puncture, kick back, machine guarding, metal wire, neck, hydraulic tool, struck by
Inspection Degree Nature Occupation
1 943080.015 Fatality Other Machinists

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.