Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 316343896 - Abm Facility Services Inc Dba Abm Building Value

Inspection Information - Office: Ca Monrovia District Office

Nr: 316343896Report ID: 0950644Open Date: 05/18/2012

Abm Facility Services Inc Dba Abm Building Value
1150 S Milliken Ave
Ontario, CA 91767
Union Status: NonUnion
SIC: 7349/Building Cleaning and Maintenance Services, Not Elsewhere
NAICS: 561790/Other Services to Buildings and Dwellings
Mailing: 1150 S Milliken Ave, Ontario, CA 91767

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:11/16/2012
Close Case:05/21/2019

Related Activity:TypeIDSafetyHealth
 Accident102715299    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 2 1 3
Initial Penalty $31,500 $0 $0 $935 $0 $32,435
Current Penalty $22,500 $0 $0 $935 $0 $23,435
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203 A 11/16/2012 12/19/2012 $935 $935 $0 J - ALJ Decision
  2. 02001 Serious 23200002 A 11/16/2012 11/24/2012 $22,500 $22,500 $0 J - ALJ Decision
  3. 03001 Serious 23200004 A02 11/16/2012 11/24/2012 $0 $9,000 $0 D - Govt Dismissed

Accident Investigation Summary
Summary Nr: 316343896Event: 05/18/2012Employee Is Electrocuted Installing Wiring And Is Killed
At approximately 8:00 a.m. on May 18, 2012, Employee #1, a Chief Engineer employed by Abm Facility Services Inc. Dba Abm Building Value, was providing building maintenance services at three buildings and was attempting to change the ballast (a Fact PSDL 3 fluorescent emergency ballast system (277 volts)) for the lights in the lobby area. Employee #1 decided to do the wiring installation while the branch circuit was energized. He went up a ladder into the crawl space above the ceiling and was wiring the ballast when he came into contact with a hot conductor and was electrocuted. Employee #1 was pronounced dead at the scene. Employee #1 had the following tools and equipment: 2 ladders, knee pads, voltage detector, wire strippers, electrician's pliers, and 2 screw drivers. The causal factors included Employee's failure to: deenergize system; and, utilize the proper safeguards and personal protective equipment necessary to work on systems while energized.
Keywords: ballast--lighting, maintenance, building, ppe, lighting fixture, electric shock
Inspection Degree Nature Occupation
1 316343896 Fatality Electric Shock Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close