Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 316210061 - Prime-Line Products Co Dba Precision Screen Doors

Inspection Information - Office: Ca San Bernardino

Nr: 316210061Report ID: 0950633Open Date: 11/16/2012

Prime-Line Products Co Dba Precision Screen Doors
26950 San Bernardino Ave
Redlands, CA 92374
Union Status: NonUnion
SIC: 3442/Metal Doors, Sash, Frames, Molding, and Trim Manufacturing
NAICS: 332321/Metal Window and Door Manufacturing

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:04/15/2013
Close Case:06/05/2014

Related Activity:TypeIDSafetyHealth

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 1 4
Current Violations 2 2 4
Initial Penalty $26,435 $0 $0 $560 $0 $26,995
Current Penalty $10,125 $0 $0 $1,120 $0 $11,245
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203 A07 04/15/2013 05/09/2013 $560 $560 $0 -
  2. 02001 Other 4202 A 04/15/2013 04/25/2013 $560 $3,375 $0 I - Informal Settlement
  3. 03001 Serious 4203 B 04/15/2013 04/25/2013 $3,375 $5,060 $0 I - Informal Settlement
  4. 04001 Serious 4206 A 04/15/2013 04/25/2013 $6,750 $18,000 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 202673364Event: 10/15/2012Employee Catches Hand In Press, Amputates Finger
At or about 12:05 p.m. on October 15, 2012, Employee #1, with Prime-Line Products Co Dba Precision Screen Doors, was operating the punch press (Walsh Press & Die Co power operated; Model Number 12; Serial Number 6251). This piece of equipment was known to the employer and Employee #1 as Press Number 40/Precision. This was the first time that Employee #1 was using this piece of equipment. Employee #1 was supposed to use it to punch a screen door part with the handle assembly punch tool of the press. On Employee #1's second punch on the press, she had her right hand too close to the point of operation for the wheel assembly punch tool, which is on the same press and immediately adjacent to the handle assembly punch tool. Employee #1's middle finger was caught in the point of operation and was amputated. At the time, the guard preventing entry into the point of operation for this press (Press Number 40/Precision) had been removed. It was found on a pallet approximately 30 ft away. Employee #1 was not hospitalized.
Keywords: amputated, finger, metal shop, point of operation, punch press, unguarded
Inspection Degree Nature Occupation
1 316210061 Non Hospitalized injury Amputation Punching and stamping press machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.