Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1531003.015 - Auburndale Recycling Center, Inc.

Inspection Information - Office: Madison

Nr: 1531003.015Report ID: 0523300Open Date: 05/15/2021

Auburndale Recycling Center, Inc.
10453 S. George Street
Auburndale, WI 54412
Union Status: NonUnion
SIC:
NAICS: 423930/Recyclable Material Merchant Wholesalers
Mailing: P.O. Box 137, Auburndale, WI 54412

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:10/13/2021
Emphasis: P:Piv, L:PivClose Case:

Related Activity:TypeIDSafetyHealth
 Accident1768071    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 2 2
Initial Penalty $27,306 $0 $0 $0 $0 $27,306
Current Penalty $19,114 $0 $0 $0 $0 $19,114
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100178 L03 II A 11/04/2021 $9,557 $13,653 $0 I - Informal Settlement
  2. 01002 Serious 19100178 L01 II 11/04/2021 01/03/2022 $9,557 $13,653 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 135608.015Event: 05/14/2021Employee Is Killed When Forklift Tips Over
At approximately 8:43 p.m. on May 14, 2021, an employee was operating the Toyota forklift (Model 8FGCU25, Serial Number 99316) at a tire recycling facility. Th e forklift had a Hippo Hopper 2 yard self-dumping hopper (model HH32, serial no. 53906) attached to the forks, and the employee was using the forklift to convey tire refuse to refuse container. At approximately 8:42 p.m. twilight conditions existed following the sunset at approximately 8:20 p.m. as the employee approac hed the north metering bin while operating the forklift. This metering bin was an open-topped refuse container. The employee raised the mast and hopper to near the upper limit of travel. The employee then drove the forklift and made a coup le of turns and while turning to the left with the hopper elevated, the forklift tipped over onto the right side, and the employee was pinned between the forkli ft and the ground. The employee was killed from the crushing injuries.
Keywords: caught between, crushing, forklift, hopper, overturn, pinned
Inspection Degree Nature Occupation
1 1531003.015 Fatality Production helpers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close