Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2 4
Current Violations 2 2 4
Initial Penalty $35,108 $0 $0 $9,753 $0 $44,861
Current Penalty $17,160 $0 $0 $7,840 $0 $25,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001A Serious 5A0001 08/05/2021 09/22/2021 $13,653 $13,653 $0 I - Informal Settlement
  2. 01001B Serious 19260020 B01 08/05/2021 09/22/2021 $0 $3,901 $0 I - Informal Settlement
  3. 01001C Serious 19260021 B02 08/05/2021 08/31/2021 $0 $13,653 $0 I - Informal Settlement
  4. 01004 Serious 19260454 A 08/05/2021 09/22/2021 $3,507 $3,901 $0 I - Informal Settlement
  5. 02001A Other 19040039 A01 08/05/2021 $7,840 $9,753 $0 I - Informal Settlement
  6. 02002B Other 19040039 A02 08/05/2021 $0 $0 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 133802.015 Event: 03/03/2021One Employee Is Killed, Another Is Injured When Lift Tips Ov
At 1:00 p.m. on March 3, 2021, Employee #1 and Employee #2 and four coworkers we re performing drive-in rack removal operations in a large cold storage warehouse . Employee #1 and Employee #2 were in a Genie GS-3232 scissor lift approximately 34 feet above the ground removing the top drive-in rail support system. Coworke r #1 was securing a rack that was being disassembled with a rope attached to a b ar joist as a make shift pulley. Coworker #2 was removing the lower drive-in rai ls that held the racking system together. Coworker #3 and Coworker #4 were picki ng up hardware that had fallen to the ground. Employee #1 was on a scissor lift assisting in the removal of a top drive-in rail support system with Employee #2. As Employee #2 removed the disassembled rail support system, the rail system su ddenly fell onto the scissor lift causing the scissor lift to tip onto its side killing Employee #1. Employee #2 was seriously injured and hospitalized but surv ived.
Keywords: aerial lift, contusion, equipment operator, falling object, fracture, hip, inexperience, leg, material handling, metal rail, overturn, pulley, puncture, roll-over, rope, scissor lift, unsecured, warehouse
Inspection Degree Nature Occupation
1 1518016.015 Fatality Construction Laborer
2 1518016.015 Hospitalized injury Construction Laborer

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.